Become a Maker at the Libraries

Fall workshops are underway at the NCSU Libraries Makerspace in D. H. Hill! Register now through our workshops page. We’re teaching everything from “Getting Started with 3D Design” to “Building and Controlling Beginner Projects with Raspberry Pi.” And our new 3D Scanning Studio makes its debut this semester too!

Our fall workshops:

Getting Started with the Internet of Things
Friday, Sept. 7, 10:00 a.m.-11:30 a.m., D. H. Hill Makerspace

3D Scanning Studio Orientation
Friday, Sept. 7, 4:00 p.m.-5:00 p.m., D. H. Hill 3D Scanning Studio

D. H. Hill Makerspace Orientation
Monday, Sept. 10, 11:00 a.m.-11:45 a.m., D. H. Hill Makerspace

3D Scanning Studio Orientation
Monday, Sept. 10, 1:00 p.m.-2:00 p.m., D. H. Hill 3D Scanning Studio

Getting Started with 3D Printing
Monday, Sept. 10, 3:00 p.m.-4:00 p.m., D. H. Hill Makerspace

NCSU's Virtual Computer Lab (VCL)
Tuesday, Sept. 11, 10:00 a.m.-11:30 a.m., D. H. Hill Multimedia Seminar Center

D. H. Hill Makerspace Orientation
Tuesday, Sept. 11, 8:00 p.m.-8:45 p.m., D. H. Hill Makerspace

3D Scanning Studio Orientation
Wednesday, Sept. 12, 12:00 p.m.-1:00 p.m., D. H. Hill 3D Scanning Studio

Getting Started with 3D Design
Monday, Sept. 17, 11:00 a.m.-12:00 p.m., D H. Hill Makerspace

Getting Started with eTextiles
Wednesday, Sept. 19, 1:30 p.m.-3:30 p.m., D. H. Hill Makerspace

Getting Started with Digital Embroidery
Monday, Sept. 24, 1:30 p.m.-3:30 p.m., D. H. Hill Makerspace

Getting Started with eTextiles
Tuesday, Oct. 16, 11:00 a.m.-1:00 p.m., D. H. Hill Makerspace

Sewing Basics I
Wednesday, Oct. 17, 1:30 p.m.-3:30 p.m., D. H. Hill Makerspace

Getting Started with Arduino
Friday, Oct. 26, 10:00 a.m.-11:30 a.m., D. H. Hill Makerspace

Getting Started with 3D Printing
Tuesday, Oct. 30, 11:00 a.m.-12:00 p.m., D. H. Hill Makerspace

Getting Started with the Raspberry Pi: Building and Controlling Beginner Projects
Friday, Nov. 2, 10:00 a.m.-11:30 a.m., D. H. Hill Makerspace

Getting Started with 3D Printing
Wednesday, Nov. 7, 11:00 a.m.-12:00 p.m., D. H. Hill Makerspace

Getting Started with the Internet of Things
Friday, Nov. 9, 10:00 a.m.-11:30 a.m., D. H. Hill Makerspace

Getting Started with Digital Embroidery
Wednesday, Nov. 14, 1:30 p.m.-3:30 p.m., D. H. Hill Makerspace