skip to search skip to content

NCSU Scholarly Publications Repository (Search Again)

A growing collection of publications and full text of scholarly works by NC State faculty members, graduate students, and research staff.

Number of Publications: 53
Buckner, Gregory D.


Articles
Kakaley, D. E., Jolly, M. R., & Buckner, G. D. (2018). An offset hub active vibration control system for mitigating helicopter vibrations during power loss: Simulation and experimental demonstration. Aerospace Science and Technology, 77, 610-625.

Allred, C. J., Churchill, D., & Buckner, G. D. (2017). Real-time estimation of helicopter rotor blade kinematics through measurement of rotation induced acceleration. Mechanical Systems and Signal Processing, 91, 183-197.

Malinga, B., & Buckner, G. D. (2016). Design optimization of a prescribed vibration system using conjoint value analysis. Engineering Optimization, 48(12), 2090-2113.

Xu, Z. L., Jernigan, S., Kleinstreuer, C., & Buckner, G. D. (2016). Solid tumor embolotherapy in hepatic arteries with an anti-reflux catheter system. Annals of Biomedical Engineering, 44(4), 1036-1046.

van den Hoven, A. F., Lam, M. G. E. H., Jernigan, S., van den Bosch, M. A. A. J., & Buckner, G. D. (2015). Innovation in catheter design for intra-arterial liver cancer treatments results in favorable particle-fluid dynamics. Journal of Experimental & Clinical Cancer Research, 34.

Wiest, J. H., & Buckner, G. D. (2015). Path optimization and control of a shape memory alloy actuated catheter for endocardial radiofrequency ablation. Robotics and Autonomous Systems, 65, 88-97.

Jernigan S. R., Osborne, J. A., Mirek C. J., & Buckner G. D. (2015). Selective internal radiation therapy: Quantifying distal penetration and distribution of resin and glass microspheres in a surrogate arterial model. Journal of Vascular and Interventional Radiology, 26(6), 897-904.

Jernigan, S. R., Osborne, J. A., Mirek, C. J., & Buckner, G. (2015). Selective internal radiation therapy: Quantifying distal penetration and distribution of resin and glass microspheres in a surrogate arterial model. Journal of Vascular and Interventional Radiology, 26(6), 897-904.

Wiest, J. H., & Buckner, G. D. (2014). Indirect intelligent sliding mode control of antagonistic shape memory alloy actuators using hysteretic recurrent neural networks. IEEE Transactions on Control Systems Technology, 22(3), 921-929.

Archer, J. R., Fang, T. G., Ferguson, S., & Buckner, G. D. (2014). Multi-objective design optimization of a variable geometry spray fuel injector. Journal of Mechanical Design (New York, N.Y. : 1990), 136(4).

Crews, J. H., & Buckner, G. D. (2012). Design optimization of a shape memory alloy-actuated robotic catheter. Journal of Intelligent Material Systems and Structures, 23(5), 545-562.

Richards, A. L., Kleinstreuer, C., Kennedy, A. S., Childress, E., & Buckner, G. D. (2012). Experimental microsphere targeting in a representative hepatic artery system. IEEE Transactions on Biomedical Engineering, 59(1), 198-204.

Hannen, J. C., Crews, J. H., & Buckner, G. D. (2012). Indirect intelligent sliding mode control of a shape memory alloy actuated flexible beam using hysteretic recurrent neural networks. Smart Materials & Structures, 21(8).

Lien, J. P., Fang, T. G., & Buckner, G. D. (2011). Hysteretic neural network modeling of spring-coupled piezoelectric actuators. Smart Materials & Structures, 20(6).

Crews, J. H., Mattson, M. G., & Buckner, G. D. (2011). Multi-objective control optimization for semi-active vehicle suspensions. Journal of Sound and Vibration, 330(23), 5502-5516.

Purser, M. F., Richards, A. L., Cook, R. C., Osborne, J. A., Cormier, D. R., & Buckner, G. D. (2011). A novel shape memory alloy annuloplasty ring for minimally invasive surgery: Design, fabrication, and evaluation. Annals of Biomedical Engineering, 39(1), 367-377.

Lien, J. P., York, A., Fang, T. G., & Buckner, G. D. (2010). Modeling piezoelectric actuators with hysteretic recurrent neural networks. Sensors and Actuators. A, Physical, 163(2), 516-525.

Jernigan, S. R., Chanoit, G., Veeramani, A., Owen, S. B., Hilliard, M., Cormier, D., Laffitte, B., & Buckner, G. (2010). A laparoscopic knot-tying device for minimally invasive cardiac surgery. European Journal of Cardio-Thoracic Surgery, 37(3), 626-630.

Purser, M. F., Richards, A. L., Cook, R. C., Osborne, J. A., Cormier, D. R., & Buckner, G. D. (2009). Evaluation of a shape memory alloy reinforced annuloplasty band for minimally invasive mitral valve repair. Annals of Thoracic Surgery, 88(4), 1312-1316.

Jernigan, S. R., Fahmy, Y., & Buckner, G. D. (2009). Implementing a remote laboratory experience into a joint engineering degree program: Aerodynamic levitation of a beach ball. IEEE Transactions on Education, 52(2), 205-213.

Chung, B. M., Lim, Y. K., & Buckner, G. D. (2009). A Learning method for multivariable PID control synthesis based on estimated plant jacobian. International Journal of Control Automation and Systems, 7(5), 737-744.

Richards, A. L., Cook, R. C., Bolotin, G., & Buckner, G. D. (2009). A dynamic heart system to facilitate the development of mitral valve repair techniques. Annals of Biomedical Engineering, 37(4), 651-660.

Zohni, O., Buckner, G., Kim, T., Kingon, A., Maranchi, J., & Siergiej, R. (2008). Effects of adhesion layers on the ferroelectric properties of lead zirconium titanate thin films deposited on silicon nitride coated silicon substrates. Thin Solid Films, 516(18), 6052-6057.

Bean, E., Chanoit, G., Jernigan, S., Bolotin, G., Osborne, J., & Buckner, G. (2008). Evaluation of a novel atrial retractor for exposure of the mitral valve in a porcine model. Journal of Thoracic and Cardiovascular Surgery, 136(6), 1492-1495.

Lu, B., Choi, H., Buckner, G. D., & Tammi, K. (2008). Linear parameter-varying techniques for control of a magnetic bearing system. Control Engineering Practice, 16(10), 1161-1172.

Veeramani, A. S., Buckner, G. D., Owen, S. B., Cook, R. C., & Bolotin, G. (2008). Modeling the dynamic behavior of a shape memory alloy actuated catheter. Smart Materials & Structures, 17(1).

Pandurangan, P., & Buckner, G. D. (2007). Assessment of damage detection methods in GRID-LOCK (R) structures. Mechanical Systems and Signal Processing, 21(5), 2185-2197.

Pandurangan, P., & Buckner, G. D. (2007). Defect identification in GRID-LOCK (R) joints. NDT & E International, 40(5), 347-356.

Jernigan, S. R., Buckner, G. D., & Eischen, J. W. (2007). Finite element modeling of the left atrium to facilitate the design of an endoscopic atrial retractor. Journal of Biomechanical Engineering, 129(6), 825-837.

Zohni, O., Buckner, G., Kim, T., Kingon, A., Maranchi, J., & Siergiej, R. (2007). Investigating thin film stresses in stacked silicon dioxide/silicon nitride structures and quantifying their effects on frequency response. Journal of Micromechanics and Microengineering, 17(5), 1042-1051.

Saadat, S., Buckner, G. D., & Noori, M. N. (2007). Structural system identification and damage detection using the intelligent parameter varying technique: An experimental study. Structural Health Monitoring, 6(3), 231-243.

Bolotin, G., Buckner, G. D., Campbell, N. B., Kocherginsky, M., Raman, J., Jeevanandam, V., & Maessen, J. G. (2007). Tissue-disruptive forces during median sternotomy. Heart Surgery Forum, 10(6), E487-E492.

Bolotin, G., Buckner, G. D., Jardine, N. J., Kiefer, A. J., Campbell, N. B., Kocherginsky, M., Raman, J., & Jeevanandam, V. (2007). A novel instrumented retractor to monitor tissue-disruptive forces during lateral thoracotomy. Journal of Thoracic and Cardiovascular Surgery, 133(4), 949-954.

Buckner, G. D., Choi, H., & Gibson, N. S. (2006). Estimating model uncertainty using confidence interval networks: Applications to robust control. Journal of Dynamic Systems, Measurement, and Control, 128(3), 626-635.

Pandurangan, P., & Buckner, G. D. (2006). Vibration analysis for damage detection in metal-to-metal adhesive joints. Experimental Mechanics, 46(5), 601-607.

Lawrence, B. M., Buckner, G. D., & Mirka, G. A. (2006). An adaptive system identification model of the biomechanical response of the human trunk during sudden loading. Journal of Biomechanical Engineering, 128(2), 235-241.

Stevens, J. M., & Buckner, G. D. (2005). Actuation and control strategies for miniature robotic surgical systems. Journal of Dynamic Systems, Measurement, and Control, 127(4), 537-549.

Lawrence, B. M., Mirka, G. A., & Buckner, G. D. (2005). Adaptive system identification applied to the biomechanical response of the human trunk during sudden loading. Journal of Biomechanics, 38(12), 2472-2479.

Kuniholm, J. F., Buckner, G. D., Nifong, W., & Orrico, M. (2005). Automated knot tying for fixation in minimally invasive, robot-assisted cardiac surgery. Journal of Biomechanical Engineering, 127(6), 1001-1008.

Dixit, R. K., & Buckner, G. D. (2005). Sliding mode observation and control for semiactive vehicle suspensions. Vehicle System Dynamics, 43(2), 83-105.

Saadat, S., Noori, M. N., Buckner, G. D., Furukawa, T. D., & Suzuki, Y. (2004). Structural health monitoring and damage detection using an intelligent parameter varying (IPV) technique. International Journal of Non-linear Mechanics, 39(10), 1687-1697.

Saadat, S., Buckner, G. D., Furukawa, T., & Noori, M. N. (2004). An intelligent parameter varying (IPV) approach for non-linear system identification of base excited structures. International Journal of Non-linear Mechanics, 39(6), 993-1004.

Buckner, G. D. (2002). Intelligent bounds on modeling uncertainty: Applications to sliding mode control. IEEE Transactions on Systems, Man, and Cybernetics. Part C, Applications and Reviews, 32(2), 113-124.

Pichot, M. A., Kajs, J. P., Murphy, B. R., Ouroua, A., Rech, B. M., Hayes, R. J., Beno, J. H., Buckner, G. D., & Palazzolo, A. B. (2001). Active magnetic bearings for energy storage systems for combat vehicles. IEEE Transactions on Magnetics, 37(1), 318-323.

Buckner, G. D., Schuetze, K. T., & Beno, J. H. (2001). Intelligent feedback linearization for active vehicle suspension control. Journal of Dynamic Systems, Measurement, and Control, 123(4), 727-733.

Buckner, G. D. (2001). Intelligent sliding mode control of cutting force during single-point turning operations. Journal of Manufacturing Science and Engineering, 123(2), 206-213.

Conference Papers
Malinga, B., Ferguson, S. M., & Buckner, G. D. (2016). Design optimization and analysis of a prescribed vibration system. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2016, Vol 2b, ) (pp. 353-360).

Hannen, J. C., & Buckner, G. D. (2013). Indirect intelligent sliding mode control using hysteretic recurrent neural networks with application to a shape memory alloy actuated beam. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol 1, ) (pp. 295-303).

Jernigan, S. R., Fortney, B., Fahmy, Y., & Buckner, G. D. (2012). Implementing effective low-cost laboratory experiments into a distance engineering program. (Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), vol 6, ) (pp. 87-94).

Haigh, C. D., Crews, J. H., Wang, S. Q., & Buckner, G. D. (2012). Modeling and experimental validation of shape memory alloy bending actuators. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol 2, ) (pp. 79-87).

Crews, J. H., & Buckner, G. D. (2012). Multi-objective design optimization of a shape memory alloy actuated robotic catheter. (Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), vol 1, ) (pp. 381-389).

Veeramani, A. S., Crews, J. H., & Buckner, G. D. (2009). Hysteretic recurrent neural networks: A tool for modeling hysteretic materials and systems. (Smart Materials & Structures, 18 7).

Purser, M., Cormier, D., Buckner, G., Cook, R., & Bolotin, G. (2008). Annuloplasty band with shape memory alloy stiffener. (Medical Device Materials IV, ) (pp. 231-236).


Search Again