| Search the Collection|Browse Subjects|Services|Library Information|Community |News & Events | |
|
|
|
|
|
|
|
|
||||
|
|||||||
Type of Document Dissertation Author Wilson, John Michael, URN etd-03312003-112831 Title LINEARLY TUNABLE RF-MEMS CAPACITORS IMPLEMENTED USING AN INTEGRATED REMOVABLE SELF-MASKING TECHNIQUE Degree PhD Graduate Program Electrical Engineering Advisory Committee
Advisor Name Title Paul D. Franzon Committee Chair Gianluca Lazzi Committee Member Jacqueline Krim Committee Member Thomas Conte Committee Member Keywords
- SANDIA
- Gear
- Rotate
- Varactor
- SUMMIT
- Removable Mask
- RF
- Self Masking
- Metallization
- Tunable Capacitor
- MEMS
- RF MEMS
Date of Defense 2003-03-28 Availability unrestricted Abstract ABSTRACT
WILSON, JOHN MICHAEL. Linearly Tunable RF-MEMS Capacitors Implemented Using an Integrated Removable Self-Masking Technique (Under the direction of Paul D. Franzon.)
MEMS tunable capacitors exhibit a non-linear capacitance verses voltage tuning characteristic. In addition, electro-statically actuated devices suffer from ?pull-in? after exceeding 33% of their total displacement. This non-linear behavior and limitation on continuous tuning that occurs from ?pull-in?, limits the easy-of-use and tuning range of previously reported MEMS tunable capacitors.
This dissertation presents a MEMS tunable capacitor that produces a wide tuning range with linear tuning throughout. The basic concept is similar to that of trimming/tuning capacitors used in early radios, where multiple metal plates create a capacitor that is varied by rotating a shaft which changes the overlap area. However, this device is built using modern IC processing methods that enable batch fabrication.
The core of the design comes from high yield, mechanically proven gear structures defined in the SUMMiT design library, available from Sandia National Labs. Significant alterations were made to the physical gear structure to realize the final device. A novel masking technique that enables the complex patterning of metal(s), in different amounts, on any layer(s) of a released chip was also conceived. This ?integrated removable self-masking technique? enables the construction of low-loss controlled impedance structures such as coplanar waveguides in a polysilicon only MEMS process. In addition, this technique allows metal to be deposited in a regulated manner on multiple layers of a post release chip so that low-loss metal-insulator-metal capacitors can be built.
Numerous device topologies are possible each with advantages and disadvantages. These various topologies and their design are discussed in detail. The metallization techniques for depositing single or dual metal layers are presented, along with a discussion on the construction of the masking layers so that they can be easily removed. Device simulation, modeling, and measurement are then presented.
Files
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access etd.pdf 33.58 Mb 02:35:26 01:19:56 01:09:56 00:34:58 00:02:59