Works (24)
Updated: July 5th, 2023 16:04
2018 journal article
Direct analysis of textile dyes from trace fibers by automated microfluidics extraction system coupled with Q-TOF mass spectrometer for forensic applications
Forensic Science International, 289, 67–74.
author keywords: Trace evidence; Textile fibers; Dyes; Microfluidics; Quadrupole-time-of-flight; Mass spectrometry
TL;DR:
This study performed a direct trace fiber analysis method via dye characterization by a novel automated microfluidics device (MFD) dye extraction system coupled with a quadrupole-time-of-flight (Q-TOF) mass spectrometer (MS).
(via Semantic Scholar)
UN Sustainable Development Goal Categories
16. Peace, Justice and Strong Institutions
(Web of Science)
Sources: Crossref, NC State University Libraries
Added: July 21, 2019
2018 article
Surface Finish and Diamond Tool Wear when machining PMMA and PC Optics
OPTICAL MANUFACTURING AND TESTING XII, Vol. 10742.
author keywords: diamond turning; polymers; surface finish; tool wear
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: December 31, 2018
2016 journal article
Design and validation of the mounting structure for BETTII balloon-based telescope with thin-walled optics
JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 2(2).
author keywords: light-weight optics; diamond turning optics; optical mounting; kinematic coupling; Balloon Experimental Twin Telescope for Infrared Interferometry
UN Sustainable Development Goal Categories
13. Climate Action
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Design of elliptically-vibrating ultrasonic actuator for nanocoining
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 45, 301–310.
author keywords: Nanocoining; Ultrasonic transducer; Nanoindentation; Structured surfaces; Diamond die; Bio-inspired technology
manuscript.elsevier.com (publisher PDF)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2016 article
Optics of Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII): delay lines and alignment
OPTICAL AND INFRARED INTERFEROMETRY AND IMAGING V, Vol. 9907.
author keywords: spatio-spectral interferometry; far infra-red; delay line; capacitive sensor; interferometric simulation; metrology; alignment
UN Sustainable Development Goal Categories
13. Climate Action
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2013 journal article
Nanostructure fabrication on germanium and silicon by nanocoining imprint technique
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879.
author keywords: Nanocoining; Phase transformation; Nanostructured; Diamond die; Silicon; Germanium
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2013 journal article
Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel
WEAR, 300(1-2), 216–224.
author keywords: Diamond tool; Electron microscopy; Diffusion; FEM
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2012 journal article
Rapid fabrication of nanostructured surfaces using nanocoining
NANOTECHNOLOGY, 23(41).
TL;DR:
A new process for creating high quality ordered arrays of nanofeatures called nanocoining is presented and parameters are discussed which enable indents to be indexed precisely to completely cover target areas.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2011 journal article
Design, modeling, fabrication, and evaluation of the air amplifier for improved detection of biomolecules by electrospray ionization mass spectrometry
INTERNATIONAL JOURNAL OF MASS SPECTROMETRY, 300(2-3), 99–107.
author keywords: Air amplifier; Electrospray ionization; Modeling; Detection limits
TL;DR:
A computer simulation that accurately portrays actual conditions and the results from these simulations are corroborated by the experimental data is developed, which can be used to predict outcomes from future designs resulting in a design process that is efficient in terms of financial cost and time.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2010 journal article
Automated Part Centering With Impulse Actuation
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 132(1).
author keywords: actuators; electric motors; hand tools; machining; plastics
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: Web Of Science
Added: August 6, 2018
2010 journal article
Diamond tool wear measurement by electron-beam-induced deposition
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721.
author keywords: Diamond turning; Diamond tool wear; EBID; Edge radius; Wear land
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2010 journal article
Diamond tool wear when machining Al6061 and 1215 steel
Wear, 268(11-12), 1434–1441.
author keywords: Diamond tool wear; Flank wear; Edge radius; Wear land; Electron beam induced deposition
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, Crossref
Added: August 6, 2018
2008 journal article
Review of vibration-assisted machining
Precision Engineering, 32(3), 153–172.
author keywords: vibration-assisted machining; ultrasonic vibration machining; vibration cutting
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Crossref
Added: January 14, 2021
2008 review
Review of vibration-assisted machining
[Review of ]. Precision Engineering, 32(3), 153–172.
Source: NC State University Libraries
Added: August 6, 2018
2006 chapter
Friction brakes
In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.
Ed(s): H. Rothbart & T. Brown
Source: NC State University Libraries
Added: August 6, 2018
2006 chapter
Friction clutches
In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.
Ed(s): H. Rothbart & T. Brown
Source: NC State University Libraries
Added: August 6, 2018
2005 patent
Polar coordinate-based profilometer and methods
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
2004 journal article
Tool force and deflection compensation for small milling tools
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 28(1), 31–45.
author keywords: milling; machining forces; tool deflection; tool stiffness; error compensation
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2001 journal article
Investigation of the direction of chip motion in diamond turning
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 25(2), 155–164.
author keywords: diamond turning; chip geometry; chip dynamics; chip control
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
1999 journal article
Influence of the grinding wheel in the ductile grinding of brittle materials: Development and verification of kinematic based model
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121(4), 638–646.
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
1998 journal article
An empirical tool force model for precision machining
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 120(4), 700–707.
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
1997 journal article
Contact between elastic bodies with an elliptic contact interface in torsion
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 64(1), 144–148.
Source: Web Of Science
Added: August 6, 2018
1997 article
Fabrication of hydrodynamic instability targets
Jared, B. H., Dow, T. A., Garrard, K. P., Moorefield, G. M., Barnes, C., Day, R. D., … Rivera, G. (1997, July). FUSION TECHNOLOGY, Vol. 31, pp. 501–503.
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
1995 patent
Apparatus and method for forming a workpiece surface into a non-rotationally symmetric shape
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
