The NC Center for Geographic Information and Analysis developed the GIS data set, County Boundaries with Shoreline, as mapped by the US Geological Survey-Digital Line Graph Program to facilitate planning, siting and impact analysis in the 100 individual counties of North Carolina. This file enables the user to make various county-level determinations when used in conjunction with other data layers. Another coverage contains straight-lined boundaries of the coastal counties without the shoreline.
This data was created to assist governmental agencies and others in making resource management decisions through use of a Geographic Information System (GIS).
>system filename: cb100sl approx. filesize = 1.48 mb > >Revisions and updates to this layer include: >4.) filename: cb100sl0306 The March 2006 update to this layer >consisted of correcting the boundaries for Mecklenburg and Iredell >counties according to Law 2001-429, Senate Bill 35. >3.) filename: cb100sl1203 The December 2003 update to this layer >consisted of correcting the boundaries for Carteret and Jones >counties according to DOT county boundary updates. >2.) filename: cb100sl1298 The December 1998 update to this layer >consisted of projecting the data from NAD27 datum, State Plane >projection, units of measure feet TO: NAD83 DATUM, State Plane >PROJECTION, UNITS OF MEASURE METERS. This was done to comply with >the NC Geographic Information Coordinating Council's >"Statement of Direction for North Carolina Corporate Geographic Database >Horizontal Reference, Datum and Unit of Measure". This reprojecting >was done in various ways depending on the data type and content. >Vector data was projected using the 'project' command in ESRI's Arc >software and topology was cleaned and built based on coverage needs. >Raster data was projected using ESRI's Grid module and various steps >as applicable. >1.) filename: cb100sl298 The February 1998 version was the first >archived version of this data. >(this file was previously named nc100.cb.sl) > A DOT-based county boundaries coverage at approximately 1:126,720 also exists in the Corporate Database. This DOT coverage should be used in conjunction with other data layers that were developed (i.e., clipped) using this coverage. Some of these coverages are: General Geology (1:250,000-scale) General Soils (1:250,000-scale) 1980 Census Boundaries/Population Federal Land Ownership
Data creation date
Acknowledgement of products derived form this data set should cite the following: The source of the Boundaries - County with Shoreline (1:100,000) data is the North Carolina Corporate Geographic Database. Earlier versions of this data set may exist. The user must be sure to use the appropriate data set for the time period of interest. While efforts have been made to ensure that these data are accurate and reliable within the state of the art, CGIA cannot assume liability for any damages or misrepresentation caused by any inaccuracies in the data or as a result of changes to the data caused by system transfers.
301 N. Wilmington Street, Suite 700
Phone and electronic mail preferred
>NCCGIA Director (Acting), Tim Johnson >Database Administration, Zsolt Nagy >Database Management (Acting), David Giordano >North Carolina Center for Geographic Information and Analysis >Governor's Office >Office of State Planning >301 N. Wilmington Street >Suite 700 >Raleigh, NC 27601-2825
NC CGIA digitized the county boundaries from USGS Digital Line Graphs on mylar basemaps. The polygons were attributed with county name, county FIPS number, county abbreviation, and total acres per county. Arcs were assigned an arc type and name. The digital files were plotted and overlayed to the originals and linework and label corrections were made.
Using ESRI's ARC/INFO GIS software, the data set was built for arc and polygon topology using the "build" command. Topology has not been edited since the last build or clean.
This data layer represents the jurisdictional boundaries of all counties in North Carolina, as mapped by the US Geological Survey-Digital Line Graph Program, 1:100,000-scale, with shoreline included.
County boundaries were digitized from 30 x 60 Series USGS mylar basemaps, which meet National Map Accuracy Standards. The digital files were plotted and overlayed to the originals and needed line corrections were made to within one linewidth.
Mylar maps from which county boundaries were digitized.
County boundaries were delineated by USGS cartographers on mylar basemaps.
301 N. Wilmington Street, Suite 700
Phone and electronic mail preferred
The file was created using ESRI's ARC/INFO version 5.0 GIS using a Calcomp digitizer and ARCEDIT. County boundaries with shoreline were digitized from hand delineated county boundaries on USGS 30 x 60 Series mylar basemaps. The digital files were attributed and checkplots were created for review by NC CGIA GIS analyst. Necessary corrections were made and new plots were run. Post processing involved edgematching and mapjoining of USGS 30 x 60 Series maps used to create the digitized data. This process generated one statewide polygon coverage showing the extent of county boundaries for NC.
301 N. Wilmington Street, Suite 700
Phone and electronic mail preferred
Carteret/Jones county boundary corrections were made by extrapolating the county line from GIS parcel data acquired from Carteret County Land Records office.
County Administration Building
Phone or electronic mail
Mecklenburg/Iredell county boundary corrections were made by extrapolating the county line from GIS parcel data acquired from Mecklenburg County GIS office.
600 E. 4th Street
Phone or electronic mail
Dataset copied.
Internal feature number.
ESRI
Total perimeter in coverage units
Software computed
Federal Information Processing code for county
U.S. Department of the Interior, U.S. Geological Survey
Internal feature number.
ESRI
Feature geometry.
ESRI
Feature geometry.
ESRI
From-node identifier of linear feature
Software computed
To-node identifier of linear feature
Software computed
Internal number of poly to left of arc
Software computed
Internal number of poly to right of arc
Software computed
Length of arc in coverage units
Software computed
Internal feature number
Software computed
Internal feature number
User defined
Arc type
NC CGIA
County boundary
NC CGIA
No particular type (closure line)
NC CGIA
Ocean Boundary
NC CGIA
Shoreline boundary
NC CGIA
State boundary
NC CGIA
An arc and polygon coverage depicting the North Carolina state and county boundaries without shoreline. The polygon attribute table (PAT) has attribute data including total area in coverage units(square meters), total perimeter (linear meters), polygon internal identification number, polygon user identification number, a FIPS numeric code indicating county identification, county name, county abbreviation, and total number of acres per county. The arc attribute table (AAT) includes unique numeric ids as well as arc type and arc name. >CB100.PAT Polygon Attribute Table >COL ITEM NAME WDTH OPUT TYP DEC DESCRIPTION >1 AREA 4 19 F 3 Area in coverage units >5 PERIMETER 4 12 F 3 Perimeter in coverage units >9 CB100SL# 4 5 B - Coverage Id >13 CB100SL-ID 4 5 B - User assigned Id >17 FIPS 4 7 B - County FIPS code >21 CO-NAME 15 15 C - County name >36 CO# 4 7 B - County FIPS code >40 CO-ABBR 4 4 C - 4 letter county abbreviation >44 SL-ID 4 5 B - Shoreline type >NC100.CB.AAT Arc Attribute Table >COL ITEM NAME WIDTH OUTPUT TYPE DEC DESCRIPTION >1 FNODE# 4 5 B - From-node id of linear feature >5 TNODE# 4 5 B - To-node id of linear feature >9 LPOLY# 4 5 B - Left-side polygon id of linear feature >13 RPOLY# 4 5 B - Right-side polygon id of linear feature >17 LENGTH 4 12 F 3 Length of linear feature in meters >21 CB100SL# 4 5 B - Internal id number >25 CB100SL-ID 4 5 B - Internal id number >29 TYPE 4 5 B - Arc type
None
301 N. Wilmington Street, Suite 700
Phone and electronic mail preferred For current COST INFORMATION, use a web browser: http://www.cgia.state.nc.us/cost.html
NCCGIA is charged with the development and maintenance of the State's corporate geographic database and, in cooperation with other mapping organizations, is committed to offering its users accurate, useful, and current information about the state. Although every effort has been made to ensure the accuracy of information, errors and conditions originating from physical sources used to develop the corporate database may be reflected in the data supplied. The client must be aware of data conditions and bear responsibility for the appropriate use of the information with respect to possible errors, original map scale, collection methodology, currency of data, and other conditions specific to certain data. NCCGIA does not support secondary distribution of this data. The use of trade names or commercial products does not constitute their endorsement by the NCCGIA or North Carolina State Government.
Data creation and large data analysis jobs contact Database Administration P:(919)733-2090. All data is available through standard ordering procedures on a cost recovery basis.
301 N. Wilmington Street, Suite 700
Phone and electronic mail preferred