North Carolina State University, College of Engineering Publications
UA 105.200
Special Collections Research Center
33.75 Linear feet
1901-2013
These records contain publications from the College of Engineering; individual departments, units, and program bulletins; and departmental and unit publications, reprints, and newsletters.
Academic study in engineering dates back to the founding of the university, with a course in "Mechanic Arts" offered during 1889. In 1923, both the School of Engineering and the Engineering Experiment Station were founded. The Experiment Station would later be renamed the Engineering Research Services Division. In 1987 the School was renamed the College of Engineering.
46 archival storage boxes, 7 cartons, 1 archival half box
North Carolina State University. College of Engineering.
Restrictions to Access
This collection is open for research; access requires at least 48 hours advance notice.
Acquisitions Information
Transferred from the College of Engineering
Preferred Citation
[Identification of item], Guide to the North Carolina State University, College of Engineering Publications, UA 105.200, Special Collections Research Center, North Carolina State University Libraries, Raleigh, NC
Copyright Notice
The nature of the NCSU Libraries' Special Collections means that copyright or other information about restrictions may be difficult or even impossible to determine despite reasonable efforts. The NCSU Libraries claims only physical ownership of most Special Collections materials.
The materials from our collections are made available for use in research, teaching, and private study, pursuant to U.S. Copyright law. The user must assume full responsibility for any use of the materials, including but not limited to, infringement of copyright and publication rights of reproduced materials. Any materials used for academic research or otherwise should be fully credited with the source.
Processing Information
Processed by: Rusty Koonts; machine-readable finding aid created by: Pat Webber; Finding aid updated by Cate Putirskis, 2009 December
Confidentiality Notice
This collection may contain materials with sensitive or confidential information that is protected under federal or state right to privacy laws and regulations. Researchers are advised that the disclosure of certain information pertaining to identifiable living individuals represented in this collection without the consent of those individuals may have legal ramifications (e.g., a cause of action under common law for invasion of privacy may arise if facts concerning an individual's private life are published that would be deemed highly offensive to a reasonable person) for which North Carolina State University assumes no responsibility.
Historical Note
Academic study in engineering dates to the first courses taught at North Carolina State University, in "mechanics" or "mechanical arts." Shortly thereafter, the Mechanics Course was split into the Mechanical and Civil Engineering departments, and was joined by the Physics and Electrical Engineering department.
In 1923, the various engineering departments were united under the newly created School of Engineering. That same year saw the establishment of the Engineering Experiment Station, which later became the Engineering Research Services Division. In 1987 the School of Engineering was renamed the College of Engineering.
Today the College of Engineering consists of fourteen departments and programs and a number of affiliated research units and centers, and maintains extensive academic, research, and extension activities.
Chronology
March 7, 1887
After years of debate, legislation was passed establishing the "North Carolina College of Agriculture and Mechanic Arts" (N.C. Senate 29-13). Engineering departments were established.
October 3, 1889
The College opened for classes. After a long, hard battle to obtain the Federal grant made available for the revolutionary idea of higher education for the working class, the North Carolina College of Agriculture and Mechanic Arts (A. and M. College, now NC State University) opened its doors. Alexander Q. Holladay was named as the first President. The first student enrolled was Walter J. Matthews, mechanic arts (engineering).
September 1892
Dr. Wallace Carl Riddick Jr. joined the faculty of the North Carolina College of Agriculture and Mechanic Arts as professor of mechanics and applied mathematics at a salary of $1,500 per year. He was ecstatic. He wrote in a letter to his sweetheart, "Come on and marry me, Lilly. They're paying me so much money I'll never spend it all." And she did.
1893
The first graduating class at N.C. State was 1893 with 19 graduates: 14 completed the course work in "mechanics" ("mechanic arts" or "engineering") to receive the BE degree (Bachelor of Engineering), and the remaining 5 received degrees in agriculture.
1895
Wallace Carl Riddick was the College's first professor of civil engineering. He became head of the Department of Civil Engineering and served until 1908.
1898
Dr. Riddick served as the first football coach of NC State. [While studying engineering at Lehigh University in the late 1880's, Riddick learned the game of football. Wake Forest College paid his way home at Easter vacation to teach them the game, for this was a new game south of the Mason-Dixon line. On the basis of this arrangement, Riddick claimed to be the first paid football coach in North Carolina.]
1899
George T. Winston became the second President of N.C. State. During his tenure, textiles courses were added.
1908
Daniel H. Hill was elected the third President, and Riddick was elected Vice President of the college (during this time he continued to teach civil engineering courses as a professor of hydraulics).
1910
Winston Hall was the first building primarily devoted to engineering activities; namely, electrical engineering, civil engineering, and the chemical department of the State Experiment Station.
1912
The football stadium was named in honor of Riddick, who had served as football coach in 1898 and 1899 and served for many years as a member of the Athletics Council.
1916
Riddick was named fourth President of the college. He served until 1923. During his administration, he was instrumental in its reorganization (the name was changed to North Carolina State College of Agriculture and Engineering), dividing it into schools with deans in charge to accommodate rapid program expansion and increased enrollment. The total number of degrees awarded by the College reaches 1,000.
March 2, 1917
The College name changed from the "North Carolina College of Agriculture and Mechanic Arts" to the "North Carolina State College of Agriculture and Engineering."
1921
Lucille Thomson became the first woman ever to enroll at NC State. She enrolled in electrical engineering. [It is a widely held belief that Katharine Stinson was the first woman to receive an engineering degree from NC State (BSME with aeronautical option, 1941). However, many believe Lucille Thomson was the first woman ever to enroll at NC State. She enrolled in 1921 (electrical engineering). While some records indicate she married and left college before earning her degree, other records say she graduated. Alumnus Dan Stewart, Class of 1923, said he distinctly recalls that Lucille graduated with his class.]
1923
Eugene Clyde Brooks became President of NC State. ; Lucille Thomson (according to some records) becomes the first woman ever to graduate (or to get an engineering degree) from NC State. [See 1921 Lucille Thomson entry.]
May 28, 1923
The School of Engineering was formed, and Riddick was named the first dean (Wallace C. Riddick, Jr., dean from 1923-1937), following his expressed desire to take on this role. The School consisted of the Electrical Engineering Department, Civil Engineering Department, Physics Department, Textile Engineering, and Mechanical Engineering. ; [During Riddick's leadership, the school grew to include 12 departments, and the Engineering Experiment Station was established. Riddick, who organized the North Carolina Society of Engineering and the Raleigh Engineers Club, remained Dean of Engineering until he retired in 1937.]
June 9, 1923
The "Engineering Experiment Station" was established by NC State's Board of Trustees.
1924
Departments that were precursors to materials science and engineering were formed in the 1920s. These were Ceramic Engineering (1924), Mining Engineering (1925), and Geology (1927).
1929
The Aeronautical Engineering Option was offered for the first time.
1930
School of Engineering enrollment (undergraduate and graduate combined) was 685.
March 27, 1931
The Consolidation Act passed, changing NC State's name from the "North Carolina State College of Agriculture and Engineering" to the "North Carolina State College of Agriculture and Engineering of the University of North Carolina."
1933
N.M. York became the first editor of Southern Engineer magazine, produced by the Engineers' Council. (In the 1980s the magazine was renamed NC State Engineer.)
1934
Col. John W. Harrelson became President of NC State, but he choose the title "Dean of Administration" instead of President. The title was later changed to Chancellor.
1935
The Department of Geological Engineering was formed from the geology and mining departments. (Courses in metallurgy in the years before 1954 were taught in the Department of Mechanical Engineering by W.W. Austin.)
1937
Wallace Carl Riddick, Jr. retired as Dean of Engineering after 14 years of service. Dean Blake Ragsdale Van Leer became dean. He served until 1942, when he left on military leave. During Van Leer's tenure, he established a service division in Diesel and Internal Combustion Engineering. More departments were established: Industrial, Ceramics, Chemical, Math, Architectural, Geological, Agricultural. The first graduate work in Engineering was offered: engineering mechanics and strength of materials. First accreditation of engineering curricula: ceramic, civil, electrical, mechanical. First honorary engineering degree was given at NC State: Arthur Ernest Morgan, Doctor of Engineering.
1940
The Department of Aeronautical Engineering was established. School of Engineering enrollment (undergraduate and graduate combined) was 1,180.
1941
One of the most significant contributions to the war effort is the Diesel Program, developed by the Mechanical Engineering Department to train naval officers. Katharine Stinson was the first woman to receive an engineering degree from NC State (BSME with aeronautical option, 1941), according to some records. [However, see note under 1921 regarding Lucille Thomson]
1942
Blake Ragsdale Van Leer resigned his position as Dean of Engineering for military leave. L.L. Vaughan was named Acting Dean ("acting" was the term for "interim" at that time). He served 3 years. During Vaughan's term (1) Army Special Team Program was conducted at Engineering School (one of four ASTP Centers in US to have an advanced engineering program); (2) NC State became the only engineering school in the South to conduct the Pratt-Whitney Fellows Program to train women as engineering aides; (3) US Bureau of Mines Laboratory was established in the School of Engineering (building transferred to NCSU in 1957); (4) groundwork was laid for establishment of a minerals research laboratory in western part of the state.
Fall 1944
The North Carolina Engineering Foundation, Inc., "a non-profit organization having for its purpose the development of the State through engineering education and research," was formed by a group of 49 representative engineers, contractors, and industrialists who interested in fostering and promoting ways of improving and developing engineering in North Carolina. (On May 3, 1999, the name changed to "NC State Engineering Foundation, Inc.")
April 1945
L.L. Vaughan stepped down as Dean of Engineering. J. Harold Lampe became Dean and went on to serve 17 years, the longest tenure of any Dean of Engineering at NC State. During Lampe's years of service (1) among curricula developed to serve special industrial needs were furniture manufacturing and management, construction, heating and air conditioning, and nuclear engineering (aeronautical engineering became an option in the Mechanical Engineering department); (2) department of Engineering Research, Industrial Extension Service, Department of Mineral Industries, Department of Nuclear Engineering, and Engineering Placement Office were established; and (3) three major buildings are constructed: Riddick Engineering Laboratories, Broughton Hall, and Burlington Nuclear Engineering Laboratories.
June 4, 1946
The Engineering Experiment Station was renamed "Department of Engineering Research" by action of the Board of Trustees.
July 29, 1946
As part of the School of Engineering, the "State College Minerals Research Laboratory" (now called the Minerals Research Laboratory) began formal operations in Asheville.
June 1949
Dr. Clifford K. Beck of Oak Ridge accepted the offer to head the Physics Department and proceeded to work on a proposal for a nuclear reactor at NC State College. The initial draft was completed July 5, 1949, and was later revised on March 30, 1950.
September 1949
Dr. Clifford K. Beck began his term as Physics Department Head. During his tenure (1) Daniels Hall space was renovated for physics, (2) approval to proceed with reactor design was secured from the AEC, (3) appropriation of $50,000 was granted by the 1949 General Assembly, (4) a curriculum in nuclear engineering, with full undergraduate, "fifth-year," and master's programs, was devised and approved.
1950
School of Engineering enrollment (undergraduate and graduate combined) was 1,690.
Summer 1950
Dr. Raymond L. Murray joined the Physics staff (Physics was in the School of Engineering at that time) at NC State College. He served as head of the Nuclear Engineering Department from fall 1963 through spring 1974.
Fall 1950
The newly organized nuclear engineering curriculum was placed into operation, and the first courses in nuclear engineering were given. Plans for construction of a building to house the 10-kW nuclear reactor on the NCSC campus were completed, and construction of the reactor and laboratory building was begun. The Burlington Mills Textile Foundation contributed $200,000 for the project.
1951
Riddick Engineering Laboratories building was named in memory of Dr. Wallace Carl Riddick. Frances M. ("Billie") Richardson became the first woman faculty member in the School of Engineering at NC State.
1952
The Advisory Council of the School of Engineering was formed, comprising a 15member group of leaders from the State's industrial, professional, and community life.
1953
Carey H. Bostian became President/Chancellor of NC State. First PhD degree in engineering was awarded to Ralph Marshall McGehee. In 1953, the first African-American graduate students enrolled at North Carolina State. Hardy Liston enrolled in mechanical engineering. Robert L. Clemons enrolled in electrical engineering and became the first African American to receive a degree from the university when he received a professional degree in electrical engineering in May 1957 (*see also 1957 below). (Hardy Liston withdrew.)
March 5,1953
The School of Engineering Advisory Council held its first organizational meeting. Maurice Hill, president of Drexel Furniture Company, Drexel, NC, was elected first chairman.
September 5, 1953
NC State's School of Engineering today operated the world's first nuclear reactor used for teaching, research and public service (first non-government nuclear reactor). One year later, NC State launched the nation's only doctoral program in nuclear engineering.
1954
The first PhDs in ceramic engineering at NC State were awarded to William C. Hackler and Albert D. Indyk. The first PhD in chemical engineering at NC State was awarded to James K. Ferrell. The first PhDs in nuclear engineering at NC State were awarded to Robert Howell Bryan and Hervasio Guimaroes de Carvolho (arguably the first Hispanic student to receive a PhD at NC State).
July 1, 1954
the Minerals Research Laboratory (MRL) became the responsibility of the School of Engineering. In 1954, the departments of Ceramic Engineering, Geological Engineering, and the Metallurgy Program in Mechanical Engineering were merged to form the Department of Mineral Industries with W.W. Austin as head. Separate degree programs were retained in ceramics, geology, and metallurgy.
1956
The first African-American undergraduate students entered NC State; all were engineering students. Walter Holmes enrolled in mechanical engineering with an aerospace option, and Irwin Holmes, Manuel Crockett, and Edward Carson enrolled in electrical engineering.
1957
Robert L. Clemons became the first African American to receive a degree from NC State, when he received a professional degree in electrical engineering. (See also 1953.)
1958
The Research Triangle Institute at Research Triangle Park was established by NC State, Duke University, and UNC-Chapel Hill.
1959
John T. Caldwell became chancellor.
1960
Irwin Holmes was the first African American to receive a bachelor's degree from NC State (electrical engineering).
1961
The first woman to receive an advanced degree in engineering from NC State was Anna Clyde Fraker (MS in metallurgical engineering) (See also 1967.)
1961
Harold Lamonds was named the first head of the Nuclear Engineering Department; he served until 1963.
1962
The first PhD in civil engineering at NC State was awarded to Charles Fisher Page.
June 1962
J. Harold Lampe stepped down as Dean of Engineering after 17 years of service, the longest term for any Dean of Engineering at NC State. Ralph E. Fadum was named Dean of Engineering. During his tenure, 1962-1978, (1) the Center for Acoustical Studies, the Water Resources Research Institute, the Engineering Design Center, and the Center for Marine and Coastal Studies were established; (2) the Department of Mechanical Engineering broadened to include Aerospace Engineering; (3) the Department of Engineering Mechanics and the Department of Materials Engineering were established; and (4) the Cooperative Engineering Education Program and Engineerin-Residence Program were initiated.
May 10, 1963
NC State's name changed from the "North Carolina State College of Agriculture and Engineering of the University of North Carolina" to "North Carolina State of the University of North Carolina at Raleigh." [Odd, but true, as if a word is missing after "State. " This cumbersome name lasted only two years.]
1964
The Water Resources Research Institute (WRRI), a joint federal-state program for the UNC System, was established at NC State. The Dean of Engineering serves as the Chairman of the Board of Directors of WRRI. [Note, University Archives says it was 1965, not 1964.] A new degree was established: the Bachelor of Science in Aerospace Engineering. Long before that, NC State offered an aeronautical option within the Bachelor of Science in Mechanical Engineering degree program.
1965
The first PhDs in mechanical engineering at NC State were awarded to Ozer Ali Arnas, Charles Team Carley, Tuncer Cebeci, and Franklin Delano Hart. School of Engineering enrollment (undergraduate and graduate combined) was 3,365.
July 1, 1965
NC State's name changed from the cumbersome "North Carolina State of the University of North Carolina at Raleigh" to "North Carolina State University at Raleigh."
1966
James K. Ferrell became head of the Department of Chemical Engineering, which he carefully nurtured to national prominence during his tenure until 1980. During Ferrell's tenure he (1) established within the College of Engineering the Eos computer system, (2) helped organize the Triangle University Computation Center that linked NC State, Duke University, and UNC-Chapel Hill in one of the world's largest university computing centers, (3) directed energy and environmental research programs in the College of Engineering, (4) and later served as the college's associate dean of research and interim dean of engineering.
1967
Anna Clyde Fraker became the first woman to receive a PhD in engineering at NC State (ceramic engineering, 1967) and the first woman to receive an advanced engineering degree of any kind at NC State. Geological Engineering left the Department of Mineral Industries to become the Department of Geosciences, in what is now the College of Physical and Mathematical Sciences.
1968
The first PhD in engineering mechanics at NC State was awarded to Larry Herbert Royster.
1969
The Center for Acoustical Studies was founded by Franklin D. Hart. The Department of Mineral Industries name was changed to Materials Engineering, and the distinctions between ceramics and metallurgy degrees was removed.
1970
The first PhD in industrial engineering at NC State was awarded to Manmohan Krishan Wig. The first PhD in materials engineering at NC State was awarded to Walter Jackson Lackey.
1972
The first PhD in operations research at NC State was awarded to Sanji Arisawa.
September 1, 1972
The Nuclear Reactor Program was established.
1988
The Mars Mission Research Center was established (according to University Archives, but College of Engineering records show 1989).
1989
Christine Grant became the first African-American woman faculty member hired in the College of Engineering and in the Department of Chemical Engineering.
August 19, 1989
The NSF Engineering Research Center for Advanced Electronic Materials Processing was established.
August 25, 1989
The Mars Missions Research Center was established (according to College of Engineering records).
September 30, 1989
Larry K. Monteith resigned as Dean of Engineering to become interim chancellor of NC State University. He became chancellor in May 1990 and served until July 1998.
October 1, 1989
James K. Ferrell was named Interim Dean of Engineering.
May 1990
Interim Chancellor Larry K. Monteith became Chancellor.
1991
School of Engineering enrollment (undergraduate and graduate combined) was 7,236.
February 1, 1991
The Pollution Prevention Research Center was established.
July 1, 1991
Dr. James K. Ferrell began serving as Director of the Center for Waste Minimization and Management (Pollution Prevention Center).
July 22,1991
James K. Ferrell stepped down as Interim Dean of Engineering.
July 23, 1991
Wilbur L. Meier Jr. was named Dean of Engineering
January 1, 1992
The Center for Robotics and Intelligent Machines was established.
January 1, 1992
The Center for Transportation and the Environment was established.
May 8, 1992
The Power Semiconductor Research Center was established.
July 1, 1992
The Furniture Manufacturing and Management Center was established.
June 30, 1993
Wilbur L. Meier Jr. stepped down as Dean of Engineering.
July 1, 1993
Tildon H. Glisson was named Interim Dean of Engineering.
September 10, 1993
The North Carolina Solar Center was established.
October 8, 1993
The Center for Nuclear Power Plant Structures, Equipment and Piping was established.
June 20, 1994
The Transportation Materials Research Center was established.
June 30, 1994
Tildon H. Glisson stepped down as Interim Dean of Engineering.
July 1, 1994
Ralph K. Cavin III became Interim Dean of Engineering.
August 1, 1994
Ralph K. Cavin III became Dean of Engineering.
October 1994
Groundbreaking for the Engineering Graduate Research Center was held.
November 2, 1994
The NC Ergonomics Resource Center was established.
August 22, 1995
The Center for Advanced Computing and Communications (CACC) reformed from the former Center for Communications and Signal Processing, established in 1982.
December 31, 1995
Ralph K. Cavin III stepped down as Dean of Engineering.
January 1, 1996
NC State's College of Engineering offered the state's first online, real-time, Internetbased distance-education class to students at the University of North Carolina at Asheville. The class was a graduate-level course in ergonomics. ; Sarah A. Rajala became the first woman to be named an associate dean in the College of Engineering. She was named Associate Dean for Academic Affairs.
July 31, 1996
John G. Gilligan stepped down as Interim Dean of Engineering.
August 1, 1996
Nino A. Masnari became Dean of Engineering.
August 1997
Women in Engineering Program was established.
October 14, 1997
Grand Opening of the Engineering Graduate Research Center (EGRC) was held.
July 1998
Larry K. Monteith stepped down as Chancellor; Marye Anne Fox became NCSU's first woman chancellor.
August 14, 1998
Kenan Center for the Utilization of Carbon Dioxide in Manufacturing was established.
May 3, 1999
The North Carolina Engineering Foundation, Inc. changed its name to the NC State Engineering Foundation, Inc.
July 30, 1999
Science and Technology Center for Environmentally Responsible Solvents and Processes was established.
November 16, 1999
Michael J. Rigsbee was named head of MSE.
November 2000
The people of North Carolina passed an educational bond issue that provided more than $468 million for the renovation and construction of almost thirty academic buildings on the NC State campus. The bond referendum was a critical step in achieving the College of Engineering's goal of relocating the entire college to Centennial Campus.
December 8, 2000
Network Technology Institute (NTI) was established. Formerly Multimedia Lab since March 13, 1998.
March 2002
NC State University was designated as a Center of Academic Excellence in Information Assurance Education by the National Security Agency.
June 17, 2002
NC Ergonomics Resource Center reformulated, previously Ergonomics Center of North Carolina since November 2, 1994.
May 2, 2003
The Department of Civil Engineering was renamed the Department of Civil, Construction, and Environmental Engineering.
September 12, 2003
Center for Embedded Systems Research (CESR) was established.
December 1, 2003
H. Troy Nagle was named interim founding chair of the new joint Department of Biomedical Engineering with UNC Chapel Hill.
January 1, 2004
Hien T. Tran (Professor of Mathematics) started his term as the new co-director of Operations Research, serving along with Yahya Fathi.
February 1, 2004
H. Troy Nagle became Chair of the Department of Biomedical Engineering.
June 30, 2004
Alan L. Tharp stepped down as department head of Computer Science.
July 1, 2004
Mladen A. Vouk began serving as interim head of Computer Science.
September 2004
Construction on Engineering Building I was completed. The Department of Chemical and Biomolecular Engineering and the Department of Materials Science and Engineering began moving in.
January 1, 2005
James L. Oblinger became NC State University's 13th chancellor.
March 2005
The Engineering Graduate Research Center (EGRC) was renamed the Larry K. Monteith Engineering Research Center (MRC).
April 22, 2005
Dedication Ceremony for Engineering Building I was held.
Compiled by Martha Brinson, Director of Communication, College of Engineering, from a wide variety of sources, including University Archives and personal letters submitted by Mrs. Eugenia Steck, daughter of Dean Riddick. This is a working document. Please check back for updates.
Scope and Content Note
These records contain publications from the North Carolina State University College of Engineering; individual departments, units, and program bulletins; and departmental and unit publications, reprints, and newsletters. Also included are reprints and published versions of speeches and lectures.
Some of the publications are about the College of Engineering itself or about
engineering education. Others report research relating to many aspects of engineering, including biological and
agricultural engineering,
chemical engineering,
civil engineering,
computer science,
electrical and computer engineering,
industrial engineering,
materials science and engineering,
minerals research,
water resources research,
nuclear engineering,
mechanical engineering, and
aerospace engineering.
Organization of the Collection
The collection is divided into four series: Bulletins, Departmental Publications, Reprints, and Serials. The first series, Bulletins, contains serialized publications from the College of Engineering and its Extension and Experiment Station units. Many of these titles were published under the rubric of the "North Carolina State College Record."
The Departmental Publications series is arranged by unit name, and within each unit the individual publications are listed alphabetically by title. The Reprints series is arranged into two subseries, Reprint Bulletins and Faculty Reprints, with the Bulletins arranged numerically the the latter arranged by departmental or unit affiliation. The final series, Serials, contains college- and departmental-level publications, such as newsletters and alumni publications. Of particular note in this series is a run of the
North Carolina State Engineer (previously titled the
Southern Engineer), beginning in 1933 and running to 1994.
Related Material
-
College of Engineering, Dean's Office Records (UA 105.001)
-
College of Engineering, Annual Reports (UA 105.002)
-
Center for Advanced Computing and Communication Technical Reports
-
Center for Communications and Signal Processing Technical Reports
North Carolina State University. College of Engineering--History.
North Carolina State University. Minerals Research Laboratory--History.
Water Resources Research Institute of the University of North Carolina.
Aerospace engineering--History
Agricultural engineering--History
Chemical engineering--History
Civil engineering--History
Computer engineering--History
Computer science--History
Electrical engineering--History
Engineering--Research--North Carolina
Engineering--Study and teaching (Higher)--North Carolina
Industrial engineering--History
Materials--History
Mechanical engineering--History
Mineralogy--Research--History
Nuclear engineering--History
Water resources research--History
Bulletins
UA 105.200 Series 1
1.75 Linear feet
1918-1971
3.5 archival boxes
Engineering Extension Bulletins
Highway Maintenance In North Carolina, Winslow, D. H. and Thomas, Charles R.
1
1918
Scope and Contents note
(North Carolina State College Record, Vol. 17, No. 2)
Engineering Experiment Station Bulletins
County Roads: Organization, Construction, And Maintenance, Tucker, Harry, Fontaine, James, and Bell, L. D.. -- (North Carolina State College Record, Vol. 26, No. 8)
No. 1
1
1927
Tests Of Face And Common Brick Manufactured In North Carolina, Greaves-Walker, A. F. and Fontaine, James. -- (North Carolina State College Record, Vol. 27, No. 8)
No. 2
1
1928
Poles From North Carolina Forests, Browne, William Hand, Jr. and Fontaine, James
No. 3
1
1929
Scope and Contents note
(North Carolina State College Record, Vol. 28, No. 8)
Pole Industry For North Carolina, Holmes, J. S.
No. 3
1
1929
Scope and Contents note
North Carolina State College Record, Vol. 28, No. 8)
Motor Vehicle Accident In North Carolina, Tucker, Harry
No. 4
1
1932
Scope and Contents note
(North Carolina State College Record, Vol. 31, No. 7)
Occurrence And Physical Properties Of North Carolina Marble, Stuckey, Jasper L. and Fontaine, James. -- (North Carolina State College Record, Vol. 32, No. 5)
No. 5
1
1933
Occurrence, Properties And Uses Of The Commercial Clays And Shales Of North Carolina, Greaves-Walker, A. F., Stolte, N. H., and Fabianic, W. L.
No. 6
1
1933
Scope and Contents note
(North Carolina State College Record, Vol. 32, No. 10)
Highway Grades And Motor Vehicle Costs, Shaw, Howard Burton, Fontaine, James, and Tucker, Harry
No. 7
1
1935
Scope and Contents note
(North Carolina State College Record, Vol. 34, No. 3)
Financial Management For Highways, Leager, Marc C.
No. 8
1
1935
Scope and Contents note
(North Carolina State College Record, Vol. 34, No. 4)
Highway Accidents In North Carolina And Guides To Safety, Tucker, Harry
No. 9
1
1935
Scope and Contents note
(North Carolina State College Record, Vol. 35, No. 1)
North Carolina Building Code
No. 10
1
1936
Production Of An Insulating Brick Using North Carolina Shales, Greaves-Walker, A. F., Cole, W. C., Jr., and Davis, S. C.: 1936, (North Carolina State College Record, Vol. 35, No. 8)
No. 11
1
Development Of Prophyllite Refractories And Refractory Cements, Greaves-Walker, A. F., Owens, C. W., Jr., Hurst, T. L., and Stone, R. L.: 1937, (North Carolina State College Record, Vol. 36, No. 3)
No. 12
1
Preparation Of Concrete Using North Carolina Materials, Tucker, Harry and Geile, W. G.: 1937, (North Carolina State College Record, Vol. 37, No. 1)
No. 13
1
Location And Distribution Of The Ceramic Mineral Deposits Of North Carolina, Greaves-Walker, A. F. and Riggs, S. G., Jr.: 1937, (North Carolina State College Record, Vol. 37, No. 2)
No. 14
1
Study Of Courses In Technical Writing, Fountain, A. M.: 1938, (North Carolina State College Record, Vol. 37, No. 9)
No. 15
1
Production Of Unfired And Fired Forsterite Refractories From North Carolina Dunites, Greaves-Walker, A. F. and Stone, R. L.: 1938, (North Carolina State College Record, Vol. 38, No. 1)
No. 16
1
Papers Presented At School For Street Superintendents And Assistants, Tucker, Harry, Comp.: 1939, (North Carolina State College Record, Vol. 38, No. 7)
No. 17
1
Net Revenue Method Of Comparing Distribution Transformers, Brown, R. R.: 1939, (North Carolina State College Record, Vol. 39, No. 3)
No. 18
1
Origin, Mineralogy And Distribution Of The Refractory Clays Of The United States, Greaves-Walker, A. F.: 1939, (North Carolina State College Record, Vol. 39, No 4)
No. 19
1
Papers Presented At School For Street Superintendents And Assistants, Tucker, Harry, Comp.: 1940, (North Carolina State College Record, Vol. 39, No. 11)
No. 20
1
Drafting Room Practices, Brown, T. C. and Moose, P. E.: 1940, (North Carolina State College Record, Vol. 40, No. 1)
No. 21
1
Development Of An Unfired Pyrophyllite Refractory, Greaves-Walker, A. F. and Amero, J. J.: 1941, (North Carolina State College Record, Vol. 40, No. 10)
No. 22
1
Suitability Of North Carolina Shales And Clays For Mortar Mixes, Greaves-Walker, A. F. and Laambertson, W. A.: 1942, (North Carolina State College Record, Vol. 41, No. 5)
No. 23
2
Development Of Light Weight Concretes From North Carolina Vermiculites, Scholes, William A., Greaves-Walker, A. F., Todd, E. R., and Cox, D. F.: 1942, (North Carolina State College Record, Vol. 41, No. 6)
No. 24
2
Ceramic Dielectric And Insulator Materials For Radio And Radar Instruments, Stone, R. L.: 1943, (North Carolina State College Record, Vol. 42, No. 3)
No. 25
2
Suitability Of North Carolina Trees For Chemical Conversion Products And For Certain Other Uses, Randolph, E. E.: 1943, (North Carolina State College Record, Vol. 42, No. 4)
No. 26
2
Factors Affecting The Firing Shrinkage Of Dry-Pressed Steatite Bodies, Stone, R. L.: 1945, (North Carolina State College Record, Vol. 44, No. 5)
No. 27
2
Binders And Shrinkage Control In Dry-Pressed Steatite Porcelains, Stone, R. L.: 1945, (North Carolina State College Record, Vol. 44, No. 7)
No. 28
2
Shrinkage Control In Steatite And Development Of Electrical Insulators, Stone, R. L.: 1945, (North Carolina State College Record, Vol. 44, No. 8)
No. 29
2
Design And Capacity Of Gutter Inlets, Conner, N. W.: 1945, (North Carolina State College Record, Vol. 44, No. 11)
No. 30
2
Investment Opportunities In North Carolina Minerals, Greaves-Walker, A. F.: 1945, (North Carolina State College Record, Vol. 45, No. 3)
No. 31
2
Flammability Characteristics Of Plastic Materials: I. Surface Temperatures Of Rigid Plastics At Ignition, Schoenborn, E. M. and Weaver, D. S., Jr.: 1946, (North Carolina State College Record, Vol. 46, No. 4)
No. 32
2
Practical Method For Predicting The Effects Of Common Acids And Alkalis On The Survival Of Fish, Stiemke, R. E. and Eckenfelder, W. W.: 1947, (North Carolina State College Record, Vol. 46, No. 5)
No. 33
2
Extent Of Stream Pollution In North Carolina, Stiemke, Robert E.: 1947, (North Carolina State College Record, Vol. 46, No. 6)
No. 34
2
Evaluation Of North Carolina Raw Materials For Manufacture Of Cement: I. Preliminary Laboratory Investigation, Adair, R. B., Dood, T. C., and Schoenborn, E. M.: 1947, (North Carolina State College Record, Vol. 46, No. 9)
No. 35
2
Tests Of An Exhaust Fan Having A Novel Blade Design, Conner, N. W. and Cain, E. P.: 1947, (North Carolina State College Record, Vol. 47, No. 3)
No. 36
2
Beach Erosion In North Carolina, Feltner, C. E.: 1948, (North Carolina State College Record, Vol. 47, No. 4)
No. 37
2
Engineering School Bulletins
Industrial Survey Of Raleigh, North Carolina, Wiggins, R. L.: 1948, (North Carolina State College Record, Vol. 47, No. 10)
No. 38
2
Reheat Shrinkage Characteristics Of Silica And Clay Mixtures, Bell, W. C.. -- (North Carolina State College Record, Vol. 47, No. 10)
No. 39
2
1948
Development Of Light-Weight Structural Clay Products, Bell, W. C.
No. 40
2
1948
Investigation Of A Tile-Beam Floor System, Feltner, C. E.
No. 41
2
1948
Evaluation Of North Carolina Raw Materials For The Production Of Portland Cement: II. Small-Scale Production Of Portland Cement, Beatty, K. O., Jr. and Adair, R. B.
No. 42
2
1948
Critical Investigation Of The Continuous And The Snap-Back Methods Of Taking Time Studies, Swerdlove, Charles A. and Llewellyn, Robert W.
No. 43
2
1949
Analogy Of The Special Theory Of Relativity To The Study Of Compressible Fluid Flow, Truitt, Robert Wesley
No. 44
2
1949
Methods Of Plotting Electrostatic Fields, Green, P. E., Jr.
No. 45
2
1949
Study Of Engineering Drawing And Design Practice In Foreign Countries, Brown, T. C.
No. 46
2
1949
Prediction Of Subsonic Pressure Distribution By The Sound-Space Theory, Truitt, Robert Wesley
No. 47
2
1950
Proceedings Of Structural Clay Products Conference
No. 48
2
1951
Investigation Of Buff- And White-Firing Clays Of North Carolina, Hart, John R.
No. 49
2
1951
Measurement Of High Frequency Speed Variation In Rotating Equipment, Manning, Edward G.
No. 50
2
1951
Solution Of The General Two-Dimensional Subsonic Compressible Flow By A New Physical Transformation, Truitt, Robert Wesley
No. 51
2
1951
Properties And Thermal Behavior Of North Carolina Sillimanite, Wilson, Hugh H., Jr.
No. 52
3
1952
Cost Savings In Furniture Manufacture By Accurate Dimensional Control, Pittman, Henry B., Jr. and Johnson, E. Sigurd
No. 53
3
1952
Attachment And Vibration Of Bus Cowl And Body, Kirk, E. R.
No. 54
3
1952
Proceedings For The First Southern Municipal And Industrial Waste Conference
No. 55
3
1952
Growth Of Single Crystals Of Mixed Alkali Halides, Stadelmaier, Hans H.
No. 56
3
1952, (Industrial Information Series Bulletin No. 1)
Service Failures In Steel Shipping Drums, Brown, B. Floyd and Stadelmaier, Hans H.
No. 57
3
1952, (Industrial Information Series Bulletin No. 2)
Slagging Of Navy Boiler Refractories, Bell, William C., Hart, John R., and Gower, Irving W.
No. 58
3
1953
Radiation Counting System For Recording Rapidly Varying Count Rates, Richardson, Frances M. and Lamonds, Harold A.
No. 59
3
1955
Elastic Coefficients Of The Cubic System With Tables For Simplified Calculations, Stadelmaier, Hans H., Pritchard, W. Maurice, and Grund, John E.
No. 60
3
1955
Test On A Broad-Crested Weir With Two Different Surface Adhesion Conditions, Long, L. W. and Conner, N. W.
No. 61
3
1956
Short Log Bolter For Furniture Stock, Redman, George P. and Willard, Rudolph
No. 62
3
1957
Investigation Of High-Speed Mechanical Transients, McDonald, P. H., Jr., Koontz, Max A., and Reichard, H. S.
No. 63
3
1957
Three Methods Of Specimen Preparation For Selected Area Electron Diffraction Examination Of Metal Film Coated Ceramic Oxide Sub-Micron Particles, Lucier, Arthur E.
No. 64
3
1958
Self-Glazing Phenomenon Associated With Shales And Clays Containing Small Amounts Of Soluble Salts, Tanner, James T., Jr.
No. 65
3
1958
Survey Of Factors Affecting The Properties Of Gray Iron, Huetter, L. J. and Stadelmaier, H. H.
No. 66
3
1958
Tensile Impact Test For Plastics, McDonald, P. H., Jr. and Edwards, J. A.
No. 67
3
1958
Control Of Reversible Thermal Expansion Of Pyrophyllite Refractories By Talc Addition, Kenan, Wilfred M.
No. 68
3
1958
Use Of Fly Ash As Pozzolan In Dense And Light-Weight Concrete, Tanner, James T. and Kenan, Wilfred M.
No. 69
3
1958
Tables Of [Phi]ⁿ For Reactor Slabs, Cylinders, And Spheres, n = 1 To n = 20, Murray, Raymond L. and Mink, Lawrence
No. 70
3
1958
Tables Of Series Coefficients For Burnup Functions, Murray, Raymond L. and Mink, Lawrence
No. 71
3
1959
Corrosion Principles Applied To Piping And Hot Water Systems, Huetter, L. J. and Stadelmaier, H. H.
No. 72
3
1959
Selected Abstracts On The Mechanical Behavior Of Ceramics, Palmour, Hayne, III, Kriegel, W. W., Duplessis, J. J., and Harrell, G. O.
No. 73
3
1959
Nodular Cast Iron, Huetter, L. J. and Stadelmaier, H. H.
No. 74
3
1959
North Carolina Conference On Utilization Of Engineers And Scientists
No. 75
3
1959
(Proceedings)
Proceedings Of The First North Carolina Highway Conference
No. 76
3
1959
Proceedings Of The Second North Carolina Highway Conference
No. 77
3
1960
Proceedings Of The Third North Carolina Highway Conference
No. 78
3
1961
Proceedings Of The Fourth North Carolina Highway Conference
No. 79
4
c1962
Tables Of F(U s , U b ) And G(U s , U b ) Functions For Semiconductor Surface Calculations, Mattauch, R. J., Lade, R. W., and Hoadley, G. B.
No. 80
4
1965
Behavior And Ultimate Strength Of Rectangular Reinforced Concrete Beams In Bending And High Shear, Zielinski, Zenon A.
No. 81
4
1967
Cermet Technology, Stoops, Robert F.
No. 82
4
1965
North Carolina Phosphates And The Texas Gulf Sulphur Company Project At The Asheville Minerals Research Laboratory, Redeker, Immo H.
No. 83
4
1966
Pimax Tables For Alpha Alumina, Witter, D. E. and Palmour, H., III
No. 84
4
1967
Pimax Tables For All Cubic Crystals, Witter, D. E. and Palmour, H., III
No. 85
4
1967
Beneficiation And Geologic Evaluation Of North Carolina Mica Shist, Lewis, Robert M., Bundy, Jerry L., and Wiener, Leonard S.
No. 86
4
1971
Industrial Information Series Bulletins
Simple Temperature-Controller Adapter For Controlled Heating And Cooling Rates, Brown, B. Floyd
No. 3
4
1953
Heat Transfer Through Cavity Masonry Walls, McDonald, P. H., Jr., Brose, King R., and Kirk, E. R.
No. 4
4
1953
Climatic Data Of North Carolina For Use By Engineers, Architects, And Contractors, Brown, T. C.
No. 5
4
1953
Rationalization Of The Coil Design For Wire-Wound Resistance Furnaces, Long, L. W. and Dillender, R. D.
No. 6
4
1953
Preliminary Report On The Froth Flotation Of Wake County Talc, Dillender, R. D., Jr. and Gower, I. W.
No. 7
4
1953
Corrosion In Piping And Heating Equipment, Brown, Floyd
No. 8
4
1953
Failures In Steel Shipping Drums -II, Brown, B. Floyd and Stadelmaier, Hans H.
No. 9
4
1954
Beneficiation Of Olivine By Means Of A Humphreys Spiral, Banks, Mason K. and Wells, W. Gay
No. 10
4
1955
X-Ray Methods Of Analysis, Stadelmaier, Hans H. and Whitener, Elizabeth M.
No. 11
4
1955
Departmental and Unit Publications
UA 105.200 Series 2
13.0 Linear feet
1947-1989
26 archival boxes
College of Engineering
General
Center For Communications And Signal Processing
4
undated
Center For Communications And Signal Processing: An Industry/University Cooperative Research Center
4
c1983
Center For Engineering Applications Of Radioisotopes
4
undate
College Of Engineering: Scholarships And Donors
4
c1993
E-100: Introduction To Engineering
4
1982-1983
Scope and Contents note
(Student Handbook)
Electric Power Research Center
4
undated
Engineering Education
4
1979
Engineering Graduate Research Center: A Milestone For The New Millenium
4
c1997
Focus You Future On Engineering At North Carolina State University
4
undated
For Generations To Come
4
c1994
Graduate Work In Electronic Materials
4
undated
Integrated Manufacturing Systems Engineering Institute
4
undated
Liquid Order
4
1997
Marine Sciences Graduate Program
4
undated
Marta Status Report Prepared For North Carolina State University Freshman Engineering Students
5
1978
Milestones For A New Millennium
5
c1997
North Carolina Technical Services Program
5
undated
Pinnacles
5
undated
Program Of Engineering Expansion
5
undated
Progress Report: Engineering Faces The Future
5
c1983
Reflections...Women In Engineering
5
undated
Research Projects
5
1997
School Of Engineering
5
1955
School Of Engineering
5
1959
School Of Engineering
5
1983
Second Interagency Symposium On University Research In Transportation Noise
5
1974
Scope and Contents note
(Program Abstracts)
Second Interagency Symposium On University Research In Transportation Noise: Volume I
5
1974
Scope and Contents note
(Proceedings)
Second Interagency Symposium On University Research In Transportation Noise: Volume II
5
1974
Scope and Contents note
(Proceedings)
2nd International Symposium on Atomic Layer Epitaxy
5
1992
Scope and Contents note
(Program)
State Of The Future For The North Carolina State University School Of Engineering
5
c1984
Summary of Conference Papers: Wood Fuel Systems: Design & Application
6
1983
Survey Or Participation In College Preparatory Mathematics And Science Courses In North Carolina, Bishop, Camille F., Houck, Byard, and Williams, Robert T.
6
c1983
R. J. Reynolds Industries, Inc. Award Distinguished Lecture Series
Role Of Solid-State Research In Electrical Engineering, Hauser, John Reid
6
1982
Scope and Contents note
(Inaugural Lecture)
Does Engineering Education Have Anything To Do With Either One?: Toward A Systems Approach To Training Engineers, Felder, Richard Mark
6
1982
Scope and Contents note
(Second Recipient)
Two Theories Of Communication, O'Neal, John Benjamin, Jr.
6
1984
Scope and Contents note
(Fourth Recipient)
On Zero And Risk, Hopfenber, Harold B.
6
1985
Scope and Contents note
(Fifth Recipient)
Overview And A Point Of View On Heat Transfer, Ozisik, M. Necati
6
1986
Scope and Contents note
(Sixth Recipient)
On Quality, Automation, Cultural Relativism, And Things Like That, Elmaghraby, Salah E.
6
1987
Scope and Contents note
(Seventh Recipient)
Humans To Mars, Dejarnette, Fred Roark
6
1990
Scope and Contents note
(Eighth Recipient)
Research Is Teaching, Bedair, Salah M.
6
1992
Scope and Contents note
(Twelfth Recipient)
Role Of Monte Carlo Methods In Engineering Education, Hassan, H. A.
6
1993
Scope and Contents note
(Thirteenth Recipient)
Radioisotope And Radiation Measurement Applications, Gardner, Robin Pierce
6
1998
Scope and Contents note
(Fourteenth Recipient)
Biological and Agricultural Engineering
Department Grows To Maturity: The History Of Agricultural Engineering At N. C. State University 1914-1977. A Contribution To The Nation's Bicentennial, Giles, G. W.
6
1979
Economic Analysis Of Alternative Poultry Litter Compost Systems, Safley, C. D. and Safley, L. M., Jr.
Economics Information Report No. 85
6
1991
Center for Acoustical Studies
Proceedings Of Noise-Con 81: Applied Noise Control Technology, Royster, Larry H., Hart, Franklin D., and Stewart, Noral D., Eds.
6
1981
Center for Marine and Coastal Studies
Comparative Study Of Three Methods Of Inhibiting Scour Around A Vertical Circular Cylinder, Rooney, David M. and Machemehl, Jerry L.
6
1976
Scope and Contents note
(Report No. 76-3)
Historical Review Of Some Of North Carolina's Coastal Inlets, Langfelder, Jay, French, Tom, McDonald, Richard, and Ledbetter, Richard
6
1974
Scope and Contents note
(Report No. 74-4)
Wave-Current Force Spectra, Tung, C. C. and Huang, N. E.
6
1972
Scope and Contents note
(Report No. 72-2)
Chemical Engineering
Chemical Engineering
7
1978
Civil, Construction, and Environmental Engineering
General
Construction Management Development Program
7
1966
Scope and Contents note
(Proceedings)
Knowledge Engineering And Expert Systems- A Historical Perspective And Introduction: Volume I, Rasdorf, William John
Technical Report CE-004-84
7
1984
Southern Water Resources And Pollution Control Conference
7
1966
Scope and Contents note
(Fifteenth Annual, Proceedings)
Southern Water Resources And Pollution Control Conference
7
1969
Scope and Contents note
(Eighteenth Annual, Proceedings)
CCEE News
Accession 2012.0134
56
2011 May
CCEE News
Accession 2012.0134
56
2012 Spring
Henry M. Shaw Lecture Series
Hidden City, Baxter, Samuel S.
7
1966
Scope and Contents note
(Inaugural Lecture)
Prestressed Concrete Structures: Some New Concepts And Developments, Lin, T. Y.
7
1966
Scope and Contents note
(Second Annual)
Behavior Of Concrete, Mather, Bryant
7
1967
Scope and Contents note
(Third Annual)
Hydraulics And Highway Engineering, Herr, Lester A.
7
1968
Scope and Contents note
(Fourth Annual)
Some Lessons From Recent Earthquakes In Relation To Seismic Design In North Carolina And Adjacent States, Seed, H. Bolton
7
1970
Scope and Contents note
(Sixth Annual)
Trends And Needs In Concrete Bridge Design, Rowe, Roy E.
7
1972
Scope and Contents note
(Seventh Annual)
Water Pollution: Environmental Impacts And Means Of Control, Whipple, Jr., William
7
1973
Scope and Contents note
(Eighth Annual)
Research In Construction Management: Its Impact On The Industry, Shaffer, Louis R.
7
1974
Scope and Contents note
(Ninth Annual)
Transportation And Its Relation To Man's Environment, Pollard, William S., Jr.
7
1975
Scope and Contents note
(Tenth Annual)
Fire Protection Of Modern Buildings: Engineering Response To New Problems, Bresler, Boris
7
1976
Scope and Contents note
(Eleventh Annual)
Geotechnical Aspects Of Large Excavations In Urban Areas, Wroth, C. K.
7
1977
Scope and Contents note
(Twelveth Annual)
Standardization--Consensus Or Chaos?, Cavanaugh, William T.
8
1978
Scope and Contents note
(Thirteenth Annual)
Challenges In Urban Runoff Control, McPherson, M. B.
8
1979
Scope and Contents note
(Fourteenth Annual)
Soil Improvement Methods And Their Applications In Civil Engineering, Mitchell, James K.
8
1981
Scope and Contents note
(Sixteenth Annual)
Amending The Clean Air Act - Or Separating Logic From Emotion - Fact From Fiction, Byrd, J. Floyd
8
1982
Scope and Contents note
(Seventeenth Annual)
Northeast Corridor Improvement Project, Thompson, Louis S.
8
1982
Scope and Contents note
(Eighteenth Annual)
Collapse Of The Kansas City Hyatt Regency Walkways, Pfrang, Edward O.
8
1983
Scope and Contents note
(Nineteenth Annual)
Reliability-Based Design In Civil Engineering, Harr, Milton Edward
8
1984
Scope and Contents note
(Twentieth Annual)
Geotechnical Surprises, Lambe, T. William
8
1985
Scope and Contents note
(Twenty-Second Annual)
Anticipating Technology's Impact On Construction, Paulson, Boyd C., Jr.
8
1986
Scope and Contents note
(Twenty-Third Annual)
Inventing Our Transportation Future, Larson, Thomas D.
8
1987
Scope and Contents note
(Twenty-Fifth Annual)
Use Of Groundwater Models And The Settlement Process At The Chem-Dyne Hazardous Waste Site, Mercer, James W.
8
1988
Scope and Contents note
(Twenty-Sixth Annual)
Causes Of The 1981 Slide In San Luis Dam, Duncan, James Michael and Stark, Timothy D.
8
1989
Scope and Contents note
(Twenty-Seventh Annual)
Merging Artificial Intelligence With CAD: Intelligent, Model-Based Engineering, Levitt, Raymond E.
8
1990
Scope and Contents note
(Twenty-Eighth Annual)
Potentials Of Computer-Based Technologies In Civil Engineering, Fenves, Steven J.
8
1991
Scope and Contents note
(Twenty-Ninth Annual)
Asphalt Concrete: An Extraordinary Material For Engineering Applications, Monismith, Carl L.
8
1993
Scope and Contents note
(Thirtieth Annual)
Biodegradation Kinetic Measurements For Synthetic Organic Chemicals - What Do They Mean?, Grady, C. P. Leslie
8
1995
Scope and Contents note
(Thirty-First Annual)
Geotechnical Earthquake Engineering Practice In North America: The Last 40 Years, Marcuson, W. F., III, Finn, W. D. Liam, and Ledbetter, R. H.
8
1996
Scope and Contents note
(Thirty-Second Annual)
Evolution Of Computing In The Building Industry, Eastman, Charles
8
1998
Scope and Contents note
(Thirty-Third Annual)
Coastal Plains Center for Marine Development Services
Workshop On Marine Activities Of The Coastal Plains Region Southeastern United States
1971
Computer Science
Graduate Study And Research
9
undated
Research
9
c1999
Computer Studies
Further Note on the Invariance of Matrix Chain Product Complexity Under Dimension Permutation, Deimel, Lionel E., Jr and Lampe, Tempe Ann
9
1980
Scope and Contents note
(Technical Report No. 80-03)
Interdisciplinary Graduate Program: Computer Studies
9
1983
Locally Minimum-Distance Correction Of Syntax Errors In Programming Languages, Tai, Kuo-Chung
9
1980 (Technical Report No. 80-02)
O(n²) Algorithm for Abelian Group Isomorphism, Savage, Carla
9
1980
Scope and Contents note
(Technical Report No. 80-01)
Top-Down Approach To The Use Of Simulation In Computer System Design, Anderson, Iva C., Deimel, Lionel E., Jr., Fornaro, Robert J., and McAllister, David F.
9
1980
Scope and Contents note
(Technical Report No. 80-04)
Diesel and Internal Combustion Engines
Influence Of Lubricating Oil Filtration On Diesel Engine Performance
9
1954
Scope and Contents note
(Fifth Annual Diesel Symposium)
Earthquake Engineering Research Institute
Regional Seminars On Earthquake Fundamentals
9
c1982
Electrical and Computer Engineering
Brief History of the North Carolina Electric Meter School & Conference, 1923-1990, Manning, Edward G.
9
1990
Electrical And Computer Engineering
9
undated
Electrical Equipment For The Textile Industry
9
1960
Scope and Contents note
(Conference Papers)
Graduate Study And Research: Electrical And Computer Engineering
9
1985
Graduate Study And Research In Electrical Engineering At North Carolina State University
9
undated
Energy Information Program
Citizen Action Guide to Energy Conservation
9
undated
Understanding the Energy Crisis Causes and Effects, Doolittle, J. S.
9
1974
Engineering Research
Research In Engineering And The Opportunity To Increase Its Influence On The Growth Of Industry In North Carolina
9
1950
Engineers Council
You...
9
undated
Furniture Manufacturing and Management Center
Furniture Manufacturing and Management Center
9
undated
Industrial Engineering
Computational Behavior Of A Feasible Direction Method For Linear Programming, Fathi, Yahya and Murty, Katta G.
IE Technical Report No. 86-11
9
1986
Computer Simulation As A Tool In Making Design And Purchasing Decisions For An Automated Guided Vehicle System, Gartland, J. P.
IE Technical Report No. 84-2
9
1984
Critique Of The El-Ramly, Peterson And Seo Procedure For Assigning The Risk-Aversion Parameter In Baumol's Expected Gain-Confidence Limit Criterion, Bernhard, Richard H.
IE Technical Report No. 76-7
10
1986
Design Procedures For Storage Carousel Using Simulation, Liao, Hsuan-Hui
IE Report No. 88-14
10
1988
Executive and Professional Education for the Southern Furniture Industry in Industrial Engineering and Business Management
10
1946
Expansion Layout And Optimization Of Inventory Levels In The Central Distribution Department Of North Carolina Memorial Hospital, Bandon, Richard L.
IE Technical Report No. 88-16
10
1988
Furniture Manufacturing and Management
10
undated
Furniture Manufacturing and Management: A Course in Technical and Management Training
10
1955
Graphic Evaluation And Review Technique (GERT)
10
1970
Scope and Contents note
(Symposium Proceedings)
Individual And Social Optimization In Birth-Death Congestion System With A General Cost-Benefit Structure, Knudsen, Niels Chr. and Stidham, Shaler, Jr.
(IE Technical Report No. 76-8
10
1976
Industrial Engineering at North Carolina State College
10
1960
North Carolina Productivity Program, Smith, William A.
IE Technical Report No. 76-5
10
1976
Optimal Design Of A Wheatston Bridge Using SQVAM, Fathi, Yahya
IE Technical Report No. 88-9 and OR Technical Report No. 225
10
1988
Productivity And North Carolina
10
1975
Raleigh Capital Area Parking Study, Tompkins, James A., Bailey, Derrick C., and Gupta, Rajiv M.
10
1977
Robust Design Of Manufactured Products: An Analytical Approach, Fathi, Yahya
IE Technical Report No. 88-8 and OR Technical Report No. 224
10
1988
Semi-Stationary Clearing Processes, Serfozo, Richard and Stidham, Shaler
10
1976
Scope and Contents note
(IE Technical Report No. 76-9)
Suitability Of Voice-Activated Control Of Peripheral Driving Tasks For The Severely Physically Handicapped, Vail, R. E., Chaffe, F., Hills, G., Plisko, A., and Redman, D.
IE Technical Report No. 86-9
10
1986
Industrial Extension Service
Alphabetic publication files
Absenteeism in Industry: A Selective Bibliography
11
1982
AMCEE Videotape Courses for Engineers, Scientists and Managers
11
1982-1983
Analysis for Decision Making, Raiffa, Howard: c1975
11
Applied Pneumatics Handbook, Eargle, Fred L.
11
1964
Apply Value Analysis to Your Own Product, Nichols, Arthur B., III
11
1965
Aquaculture of the American Eel (Anguilla Rostrata), Angel, Norman B. and Jones, Walter R.
11
1974
Audio Tape Library, Cassettes for Loan
11
1974
Audio Tape Library, Cassettes for Loan
11
1978
Audio Tape Library, Cassettes for Loan
11
1979
Audio Tape Library, Cassettes for Loan
11
1982
Audio Tape Library
11
undated
Available Study Manuals in the Field of Applied Engineering and Engineering Management
11
undated
Break-Even Chart for My Company, Tucker, George E.: undated
11
Brick Handling Costs From the Curb to the Mason, Eargle, Fred L.
11
1965
Catalog of Services
11
1972
Catalog of Services
11
1973
Catalog of Services
11
1974
Catalog of Services
11
1975
Catalog of Services
11
1976
Catalog of Services
11
1976
Catalog of Services
12
1977
Catalog of Services
12
1979
Catalog of Services
12
1982
Catalog of Services
12
1984-1985
Catalog of Services
12
1986-1987
Chip Production for Pulp Mills, McGee, Lawrence B.
12
1956
Chip Production for Pulp Mills Supplement, McGee, Lawrence B.
12
1957
Comparison Study of Three Bricklaying Methods, Eargle, Fred L. and Travis, Charles J.
12
1964
Computer Based Automation in North Carolina, Friedrich, Wayne, Edwards, Robert L. and Stephenson, Thomas W.
12
1985
Continuing Education for Scientists and Engineers: Delivery Systems in North Carolina, Harrell, Daniel E. and Gibbs, Rebecca
11
1981
Counseling Employees: A Selective Bibliography, Arneth, Stephanie
12
1976
Delegation Is Leadership, Coward, Stuart D.
12
1967
Determining the Market for New Products Processes or Services, Kohl, Jerome
12
1970
Determining Training Needs: A Selective Bibliography, Koch, Annalise K.
12
1978
Directory of Computer Service Organizations in North Carolina, Taylor, V. Eddie, Jr., Ed.
12
1969
Directory of Consulting Engineering Firms in North Carolina, Travis, J. Ben, Comp.
12
1971
Directory of Consulting Engineering Services in North Carolina, Cowgill, W. Paul and Stephenson, Thomas W., Comps.
13
1976
Directory of Consulting Firms in the Air Pollution Field, McColman, J. A.
13
1975, (Edition No. 5)
Directory of Engineers Registered in North Carolina, Mudge, Harley L., Jr.
13
1967
Directory of Firms Using Numerical Control in North Carolina, Mudge, Harley L., Jr.
13
1969
Directory of North Carolina Chemical Producers, Macon, John A.
13
1965
Directory of North Carolina Consulting Firms Performing Air Pollution Control Services, Canada, John R.
13
1972
Directory of North Carolina Plastics Producers and Processors, Mudge, Harley L., Jr.
13
1965
Directory of North Carolina Research, Development and Testing Laboratories, Boone, Mark P.
13
1976
Directory of Trade and Professional Associations in North Carolina, Angel, Norman B.
13
1968
Discipline in Industry: A Selective Bibliography, Koch, Annalise K.
13
1977
Diversified Glass Containers: A Manufacturing Opportunity in the Piedmont Area of North Carolina, Harrell, Georg O.
13
1968
Education for Engineers, Lampe, J. Harold
13
1962
Electrical Discharge Machining and Surface Finishing, Edwards, Robert L.
13
1976
Electrical Discharge Machining and Surface Finishing, Edwards, Robert L.
13
1977, (Revised)
Employee Orientation: A Selective Bibliography, Arneth, Stephanie
13
1976
Engineering Education in North Carolina-Present and Future
13
1975
Engineering Examinations Bibliography
13
undated
Engineering Index to Magazine and Trade Journals Articles of Technical Interest,An, Taylor, Vernon Eddie and Travis, J. Ben: c1968
14
Engineering Registration: A Selective Bibliography
14
1976
Engineering Registration: A Selective Bibliography
14
1979
Engineers Show Basic-Wits How to Move, Copeland, Bernard L.
14
1964
Equal Employment Opportunity: A Selective Bibliography
14
1976
Equal Employment Opportunity and Affirmative Action: A Selective Bibliography
14
1979
Estimation and Analysis for Manufacturing Decisions, Willard, Rudolph and Myers, Thomas W.
14
1976
Evaluation Study of Mica Tailing as a Raw Material for Alum Production, Macon, John A.
14
1964
Evaluational Training: A Selective Bibliography, Koch, Annalise K.
14
1978
Extension Services for North Carolina Industry
14
1968
Extension Services for North Carolina Industry
14
1970
Film/Video Library: Training Films for Loan
14
undated
Finger-Jointed Chair Back Posts Combine Two Woods for Savings, Tucker, George E.
14
1969
Furniture Construction, Willard, Rudolph
14
1970
Furniture Construction, Willard, Rudolph
14
1975
Furniture Construction, Willard, Rudolph
14
1982
Furniture Construction Hardware: A New Market for the Small Metalworking Shop, Mudge, Harley L., Jr.: c1964
14
Furniture Construction Research Results: A Collection of Reports on Applied Research Projects
14
1968
Furniture Dimension Stock Report, Rinne, Allan W., Sparks, Marvin R., and Travis, J. Ben
14
1966
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 2, No. 1, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., And Ford, Travis
15
1972
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Index to Volume 2, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., and Ford, Travis
15
1973
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 3, No. 1, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., Robinson, Sarah, And Gartman, Sharon
15
1973
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 3, No. 2, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., Robinson, Sarah, And Gartman, Sharon
15
1973
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 3, No. 3, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., Robinson, Sarah, And Gartman, Sharon
15
1973
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 3, No. 4, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., Robinson, Sarah, And Gartman, Sharon
15
1974
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Index to Volume 3, Briggs, E. L., Jr., Clark, Edward L., Parrish, Jimmy F., Robinson, Sarah, And Gartman, Sharon
15
1974
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 4, No. 3, Ekwall, John, Clark, Edward, Robinson, Sarah, and Gartman, Sharon
15
1974
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 4, No. 4, Ekwall, John, Clark, Edward, Robinson, Rhodes, Robinson, Sarah, Gartman, Sharon, and Lockhart, Steve
15
1974
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Index to Volume 4, Ekwall, John A., Clark, Edward L., Mangum, Shirley, And Lockhart, Steve
15
1975
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 5, No. 1, Ekwall, John, Clark, Edward L., Lockhart, Steve, and Mangum, Shirley
15
1975
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 5, No. 3, Ekwall, John, Clark, Edward L., Watkins, Linda, Davies, Beth, Lockhart, Steve, and Mangum, Shirley
15
1976
Furniture Index: Technical Writing Of Value And Interest To Furniture People, Vol. 5, No. 4, Ekwall, John, Clark, Edward L., Willard, Rudy, Lockhart, Steve, and Watkins, Linda
15
1976
Furniture Industry Information Guide, Lowe, William C.
15
1971
Furniture Industry Information Guide, Lowe, William C.
15
1973, (Revised)
Furniture Industry Information Guide, Simpson, Ronald M.
15
1981
Furniture Industry Problem Solver: Teflon-S
15
1969
Furniture Manufacturing Processes, Prak, Anco L. and Myers, Thomas W.
15
1977
Furniture Manufacturing Processes, Prak, Anco L. and Myers, Thomas W.
15
1981
Good Morale Pays Off, Clark, Edward L.
15
1969
Graphic Method for Finding Required Number of Time Study Reading, Hansen, B. L.
15
1957
Guide to Basic Sources of Information for Exporters, Koch, Annalise K.
15
1980
Guide to Short Interval Scheduling, Erwin, Walter W.
15
1978
Guide to Time Study Procedures, Erwin, Walter W.
15
1973
Guide to Time Study Procedures, Erwin, Walter W.
15
1975
Guide to Time Study Procedures, Erwin, Walter W.
15
1977
Guide to Time Study Procedures, Erwin, Walter W.
15
1978
Guide to Work Sampling Procedures, Erwin, Walter W.
16
1974
Guide to Work Sampling Procedures, Erwin, Walter W.
16
1975
Guide to Work Sampling Procedures, Erwin, Walter W.
16
1978
Guidelines for Developing a Noise Compliance Plan in Establishing An Effective Hearing Conservation Program, Royster, L. H.
16
1977
Handbook Lending Library Catalog, August
16
1969
Handbook Lending Library Catalog, January
16
1969
Hazardous Waste Management Procedures and Training, Kohl, Jerome and Triplett, Brooke
16
1982, (Final Report)
Home-Size Solar-Powered Engine for Cooling, Smetana, F. O., Bladen, P. G., and Dameron, T. Barker, III
16
1979
How Good are Your Supervisors?, Reed, R. and Furlong, R. D.
16
1955
How to Control Labor Costs, Allen, Rufus C.
16
1959
How to Talk-and Listen-Better, Morrison, James H.: June
16
1959
Improved Moisture Cycling Performance in Dowel Joints, Hoadley, R. Bruce
16
1976
Improving Productivity in Industry: A Selective Bibliography
16
1977
Improving Productivity in Industry: A Selective Bibliography
16
1979
Incentive Pay for the Cutting Room, Yamamoto,W. G.
16
1982
Incentive Plans: A Selective Bibliography, Koch, Annalise K.
16
1977
Incentive Plans: A Selective Bibliography
16
1979
Incentive Plans: A Selective Bibliography, Ayers, Sara
16
1982
Incentive Wages, Coward, Stuart D.
16
1958
In-Company Training
16
undated
In-Company Workshops for Business and Industrial Firms in North Carolina
16
1972
In-Company Workshops for Business and Industrial Firms in North Carolina
16
1973
In-Plant Training Courses and Materials
16
undated
Industrial Applications of Lasers, Erb, G. E.
16
1966
Industrial Extension Service Aids Tar Heel Industry in Keeping Pace with Rapidly Changing Technology, July
16
1964
Industrial Films Library: Keys to Productivity Supervision and Industrial Relations Engineering, Economics Safety
16
1958
Industrial Films Library: Keys to Industrial Productivity
16
1959
Industrial Films Library
16
1961
Industrial Films Library
16
1963
Industrial Films Library
16
1966
Industrial Films Library
16
1968
Industrial Films Library
16
1970
Industrial Lighting, Ogburn, J. R.: undated
16
Information for Industry
16
undated
Initiating a Preventative Maintenance Program, Jones, Arthur R.
16
1965
Interviewing and Selection of Employees: A Bibliography, Arneth, Stephanie
16
1976
Introduction to Industrial Engineering for Small Industry and Business, Carson, R. G., Jr. and Canada, John R.
16
1968,
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
16
1972
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
16
1973
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
17
1974
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
17
1978
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
17
1981
Introduction to Job Evaluation and Wage Administration, Eargle, Fred L.
17
1985
Job Description: A Selective Bibliography
17
1976
Job Enrichment: A Selective Bibliography
17
1980
Job Enrichment: A Selective Bibliography, Koch, Annalise K.
17
1977
Job Evaluation and You, Coward, Stuart D.
17
1958
Knowledge Worker Productivity Measurement: A Selective Bibliography, Koch, Annalise K.
17
1982
Laser Tooling Goes to Work, Fienberg, Bernard
17
1967
Leadership Development by 16mm Film or Videocassette with Study Guides and Correlated Discussion Manuals
17
1976
Library of Programmed Instruction Material, March
17
1968
Library of Programmed Instruction Material, September
17
1968
Library of Programmed Instruction Material, Supplement, January
17
1969
Library of Programmed Instruction Material, Spring
17
1969
Library of Programmed Instruction Material, Supplement
17
undated
Liquid Flow Meter "V" Notch Weir, Macon, John A.
17
1958
Lumber Waste on Upholstery Frames, Willard, Rudolph
17
1970
Management by Objectives, Deegan, Arthur X., II
17
1969
Management by Objective: A Selective Bibliography, Simpson, M. Ronald
17
1976
Management of Time: A Selective Bibliography, Arneth, Stephanie
17
1976
Managing and Minimizing Hazardous Waste Metal Sludges: North Carolina Case Studies, Services, and Regulations, Kohl, Jerome and Triplett, Brooke
17
1984
Managing and Recycling Solvents: North Carolina Practices, Facilities, and Regulations, Kohl, Jerome, Moses, Phillip, and Triplett, Brooke
17
1984
Masonry Contractors' Survey, Eargle, Fred L.
17
1964
Measuring and Improving Productivity in the Office: A Selective Bibliography, Koch, Annalise K.: May 1979
17
Metal Fatigue: A Summary, Edwards, Robert L.
17
1980
Methods-Time Measurements Fundamentals, Erwin, Walter W.
17
1974
Methods-Time Measurements Fundamentals, Erwin, Walter W.
17
1975
Methods-Time Measurements Fundamentals, Erwin, Walter W.
18
1980
Metrication: A Selective Bibliography, Koch, Annalise K.
18
1976
Model Welding Procedure Specification, Edwards, Robert L.
18
1975
Monorail Manufacturers Association Specifications for Overhead Track System
18
1964
Motivation: A Selective Bibliography
18
1981
Motivation: A Selective Bibliography, Koch, Annalise K.
18
1976
New Rotomolding Material-Polystyrene, From Modern Plastics
18
1967
Noise Control Technology for Selected Woodworking Machinery, Hart, F. D. and Stewart, J. S.
18
1983
North Carolina Metalworking Directory, Edwards, Robert L.
18
1978
North Carolina Metalworking Directory, Edwards, Robert L.
18
1981
North Carolina Metalworking Facilities Directory, Carlyle, A. A.
18
1958
North Carolina Metalworking Facilities Directory, Hodge, W. Frank
18
1962
North Carolina Metalworking Facilities Directory, Travis, J. Ben
18
1968
North Carolina Occupational Safety and Health Resource Guide, Newby, J. Parks and Cecich, Thomas F.
19
1975
North Carolina Plastics Processors and Producers, Haaxma, Harry C.
19
1973
North Carolina Plastics Processors and Producers, Haaxma, Harry C.
19
1974
North Carolina Plastics Processors and Producers, Cowgill, W. Paul
19
1977
North Carolina Plastics Processors and Producers, Cowgill, W. Paul
19
1980
North Carolina Plastics Processors and Producers, Cowgill, W. Paul
19
1983
North Carolina Technical Services Program
19
1967
North Carolina Technical Services Program
19
1968
Numerical Control: How to Evaluate It, Bulkin, M. H.
19
1965
Numerical Control: Introduction, Mudge, Harley L.: undated (Study Guide I)
19
Numerical Control: Programming, Mudge, Harley L.: undated (Study Guide II)
19
Numerical Control: Management, Mudge, Harley L.: undated (Study Guide III)
19
Occupational Locking and Tagging Guide, Brooks, John C.: undated
19
Order Scheduling in a Job Shop, Eargle, Fred L.
19
1972
Organization Development: A Selective Bibliography, Koch, Annalise K.
19
1970
OSHA and the National Electric Code
19
1977
Overview of Current Problems Relative to the High School Bricklaying Program in North Carolina, An, Eargle, Fred L.
19
1968
Papers Presented At North Carolina Nuclear Environmental Workshop
19
1970
Performance Appraisal: A Selective Bibliography, Koch, Annalise K.
19
1979
Phosphates: Eastern North Carolina, Seely, J. Frank
19
1968
Plastic Films of Interest to Food Packagers, McGee, Lawrence B.
20
1958
Plastic Pipe for You
20
1954
Plastics Technical Information Resource Guide
20
1968
Possible Role of Shell Limestone in the Chemical Complex, Hart, John R.
20
1965
Practical Applications of Solar Energy: A Selective Bibliography, Koch, Annalise K.
20
1975
Practical Applications of Solar Energy: A Selective Bibliography, Koch, Annalise K.
20
1977
Practical Aspects of Aluminum Sulfate Production in North Carolina, Macon, John A.
20
1963
Practical Cost Control for Furniture Assemble Plants, Willard, Rudolph
20
1956
Primary North Carolina Industrial Health Hazards
20
undated
Principles of Supervision: In-Plant Training Materials for a Supervisory Development Workshop
20
undated
Proceeding From Industrial Energy Conservation Workshop
20
1973
Proceedings of the Working Conference of the North Carolina Committee on Energy and the Environment
20
1971
Product Cost Estimating and Feasibility Guide, Travis, Charles J.
20
1966
Product Cost Estimating and Feasibility Guide, Travis, Charles J.
20
1969
Production and Inventory Control: An Information Resource Guide, Becker, P.: 1970
20
Production of Industrial Phosphate Chemicals in North Carolina Chemical Workshop Data Sheets, Macon, John A.
20
1962
Production of Industrial Phosphate Chemicals in North Carolina Chemical Workshop Data Sheets, Macon, John A.: c1962
20
Production Woodworking Equipment, Willard, Rudolph
20
1970
Production Woodworking Equipment, Willard, Rudolph
21
1980
Properties of Particle Board Relating to Its Use in Furniture Manufacturing, McGee, L. B., McLean, R. A., and Carlyle, A. A.
21
1957
Proposed Facility to Manufacture and Market Fiberglass Reinforced Plastic Bathroom Modules, Tub-Shower Enclosures and Other Components of the Building Industry, Erwin, Walter W. and Travis, J. Ben
21
1972
Proposed Wage Incentive Plan for the Delivery of Unit Masonry Items, Eargle, Fred L.
21
1962
Publications, Keys to Industrial Productivity
21
1959
Publications List
21
1961-1962
Publications List
21
1964
Publications List
21
1965
Publications List, Eargle, Fred L.
21
1966
Publications List
21
1968
Publications List
21
1973
Publications List
21
1977
Publications List
21
1978
Publications List
21
1979
Publications
21
undated
Quality Circle Concepts: Increasing Productivity Through Employee Involvement
21
undated
Quality Control: An Information Resource Guide
21
1969
Reducing Hazards in Materials Handling
21
1973
Report of Plastics Investigation, McGee, Lawrence B.
21
1959
Results of Preliminary Investigations Into Brick Packaging, Eargle, Fred L.: undated
21
Safeguarding-Machine Tools, c1971
21
Security Management in Business and Industry: A Selective Bibliography, Koch, Annalise K.
21
1980
Services to Business and Industry in North Carolina
21
1973
Short Log Bolter for Funiture Stock, Redman, George P.
21
1957
Shortest Course in Drafting
21
undated
Should We Automate Now?, Canada, John R. and Edwards, Robert L.
22
1985
Shuttle Kiln Plans and Bills of Materials
22
1956
SMILE for Profits, Stephenson, Thomas W.
22
1977
16 Soft Spots to Hit in Maintenance Costs, Jones, J. H.
22
1958
Source Directory for Metalworking Services and Firms in North Carolina, Edwards, Robert L.
22
1975
Sources of Aid for Small and Minority Businesses, Koch, Annalise K.
22
1980
Southern Municipal and Industrial Waste Conference Proceedings, Third Annual
22
1954
Southern Municipal and Industrial Waste Conference Proceedings, Sixth Annual
22
1957
Southern Municipal and Industrial Waste Conference Proceedings, Ninth Annual
22
1960
Southern Municipal and Industrial Waste Conference Proceedings, Twelfth Annual
22
1963
Southern Water Resources and Pollution Control Conference, Fifteenth Annual
23
1966
Study of Meat-Packing Wastes in North Carolina-Part I, Introduction and Plant Effluent Studies, Macon, John A. and Cote, Daniel N.
23
1961
Suggestion Systems: A Selective Bibliography, Pattison, Nancy C.
23
1979
Supervision: A Selective Bibliography-1974-1978, Koch, Annalise K.
23
1979
Survey of Mineral Fillers in Selected Industries-Phase I: Plastics and Textiles
23
1971
Systems of Generation of Electricity
23
undated
Technical and Managerial Resource Services for North Carolina Business and Industry
23
1972
Technical and Managerial Resource Services for North Carolina Business and Industry
23
1974
Technical Assistance for North Carolina Industry
23
1970
Technical Tools of Management, Tucker, George E.: undated
23
Techniques for Evaluating Investment Projects, Canada, John R.
23
1966
Tips on Better Delegating, O'Connor, Roderick F.
23
1958
Tips to Successful Discipline, King, Paul A.
23
1958
25 Points in Favor of Numerical Controls, Howick, George J.
23
1965
Use and Value of Major Industrial Phosphate Chemicals, Travis, Charles J.: c1975
23
Use of Various Unloading Devices for Unit Masonry Items, Eargle, Fred L.
23
1961
Using Linear Programming to Determine Time Standards, Chisman, James A.
23
1966
Utilization Study of North Carolina White Pine, Rinne, Allan: undated
23
What Does It Really Cost to Own Inventory?, Willard, Rudolph
23
1969
What Is Drafting Today
23
undated
Wood: An Alternate Energy Resource for Appalachian Industry and Institutions, Kohl, Jerome, Pulaski, Ellen, Rao, Deepak, and Triplett, Brooke
23
1981
Wood as a Residential Fuel: A Selective Bibliography, Koch, Annalise K.
23
1979
Wood Energy Information Guide, Pulaski, Ellen C., Karmous, Moustafa K., Jahn, Larry G., and Wainwright, Phyllis B.: c1979
23
Wood Particle Board Handbook, Carlyle, A. A., McGee, L. B., and McLean, R. A.: 1956
23
Wood Substitutes and Imports-Status Report, Clark, E. L.
24
1969
Work Sampling, Virgils, Russell E.
24
1968
Writing Business Reports: A Selective Bibliography
24
1976
Zero-Based Budget: A Selective Bibliography, Koch, Annalise K.
24
1978
Facts for Industry Series Bulletins
Practical Guide to the Selection of Tool Steels, Austin, William W.
No. 1
24
1955
Water for Industry, Smallwood, Charles, Jr. and Nemerow, Nelson L.
No. 2
24
1955
Introduction to Industrial Engineering, Carson, R. G., Jr.
No. 3
24
1955
X-Rays in Industry, Stadelmaier, Hans H. and Whitener, Elizabeth M.
No. 4
24
1955
Water Wastes of Industry, Nemerow, Nelson
No. 5
24
1956
College Recruiting for Small Industry, Wicker, Marie P.
No. 6
24
1957
Quality Control Charts for Variables, Yamamoto, Willy G.
No. 7
24
1958
Wage Incentives for the Small Plant, Carson, Robert G., Jr.
No. 8
24
1958
Report on Sprayed Roof Cooling Systems, Blount, Sam M., Jr.
No. 9
24
1958
Job Evaluation for Industry, Coward, Stuart D.
No. 10
24
1958
Quality Control Charts for Attributes, Yamamoto, Willy G.
No. 11
24
1959
Quality Control Charts for Attributes
No. 11
24
1967
Standard Heating Requirements for the Commercial Storage of Sweet Potatoes, Blount, Sam M., Jr.
No. 12
24
1960
Directory of North Carolina Chemical Producers and Plastic Processors, McGee, Lawrence B.
No. 13
24
1960
Directory of North Carolina Chemical Producers and Plastic Processors, Supplement, McGee, Lawrence B.
No. 13
24
1961
Industrial Water Simplified Test Procedures, Eargle, Fred L.
No. 14
24
1959
Measures of a Man Methods of Employee Performance Rating, Eargle, Fred L.
No. 15
24
1961
Measures of a Man Methods of Employee Performance Rating, Eargle, Fred L.
No. 15
24
1965
Measures of a Man Methods of Employee Performance Rating, Eargle, Fred L.
No. 15
24
1968
Measures of a Man Methods of Employee Performance Rating, Eargle, Fred L.
No. 15
24
1971
Industrial Performance Report of the IES Screen Separator, Macon, John A.
No. 16
24
1961
Practical Cost Control for Industrial Plant, Yamamoto, Willy G. and Willard, Rudolph
No. 17
24
June, 1961
Directory of North Carolina Electronic and Electrical Equipment and Component Manufacturers, Hart, John R.
No. 18
24
1962
Directory of North Carolina Electronic and Electrical Equipment and Component Manufacturers, Supplement, Rinne, Allen W.
No. 18
24
1968
Chemical Production Basic Schemes-Raw Materials to End Product, Macon, John A. and Noble, Jesse T.
No. 19
24
1962
Quality Control: Acceptance Sampling Inspection, Yamamoto, Willy G.
No. 21
24
1962
Quality Control: Acceptance Sampling Inspection, Yamamoto, Willy G.
No. 21
24
1967
Quality Control: Acceptance Sampling Inspection, Yamamoto, Willy G.
No. 21
24
1976
Quality Control: Acceptance Sampling Inspection, Yamamoto, Willy G.
No. 21
24
1979
Quality Control: Acceptance Sampling Inspection, Yamamoto, Willy G.
No. 21
24
1984
Lighting in North Carolina Industry, Ogburn, J. R. and Hodge, W. Frank
No. 23
24
1963
Industrial Phosphate Chemical: Their Adaptability for Manufacture in North Carolina, Macon, John A., Travis, Charles J., and Gates, Louis E.
Unnumbered
24
1964
North Carolina's Changing Economy, Rinne, Allan W.
Unnumbered
24
1964
Role of Industrial Research in North Carolina's Industrial Future, Bell, William C.
Unnumbered
24
1963
Operator Training Manuals
How to Use the Furniture Operator Training Manuals, Clark, Edward L.
25
undated
Operator Training Manual for Dovetailer, Clark, Edward L., Briggs, E. L., Jr., Sparks, Marvin R., and Travis, J. Ben
1
25
1970
Operator Training Manual for Horizontal Multiple Spindle Boring Machine, Randall, Nick and Bost, John
8
25
1971
Operator Training Manual for Vertical Multiple Spindle Boring Machine, Randall, Nick and Bost, John
9
25
1971
Operator Training Manual for Variety Saw, Weavil, Douglas K.
11
25
1970
Operator Training Manual for Multiple Spindle Maka-Type Mortiser, Weavil, Douglas K.
12
25
1970
Operator Training Manual for Multiple Carver, Clark, Edward L., Briggs, E. L., Jr., Sparks, Marvin R., and Travis, J. Ben
13
25
1970
Operator Training Manual for Edge Sander, Clark, Edward L., Briggs, E. L., Jr., Sparks, Marvin R., and Travis, J. Ben
14
25
1970
Operator Training Manual for the Glue Reel, Weavil, Douglas K.
15
25
1970
Operator Training Manual for Automatic Turning Lathe, Randall, Nicholas E.
16
25
1970
Operator Training Manual for Single Surface Planer, Randall, Nicholas E.
17
25
1970
Operator Training Manual for Double End Tenoner, Houston, Lee
19
25
1970
Operator Training Manual for Double Surface Planer, Randall, Nicholas E.
20
25
1970
Operator Training Manual for Facer, Randall, Nicholas E.
21
25
1970
Operator Training Manual for Hand Shaper, Weavil, Douglas K.
22
25
1970
Operator Training Manual for Double End Trim and Boring Machine, Weavil, Douglas K.
23
25
1970
Operator Training Manual for Moulder, Houston, Lee
24
25
1971
Operator Training Manual for Automatic Shaper-Revolving Table, Weavil, Douglas K.
25
25
1971
Operator Training Manual for Chain-Driven Automatic Shaper, Weavil, Douglas K.
26
25
1971
Operator Training Manual for Spindle Hollow Chisel Mortiser, Weavil, Douglas K.
27
25
1970
Operator Training Manual for Front and Back Post Boring Machine, Weavil, Douglas K.
28
25
1971
Operator Training Manual for Abrasive Planer, Randall, Nicholas E.
29
25
1970
Operator Training Manual for Wide Belt Sander, Randall, Nicholas E.
30
25
1970
Operator Training Manual for Multi-Drum Sander, Randall, Nicholas E.
31
25
1970
Operator Training Manual for Automatic Double Belt Feed Through Sander, Randall, Nicholas E.
33
25
1970
Operator Training Manual for Tapeless Splicer, Portoghese, A. Jerome
76
25
1971
Operator Training Manual for Veneer Edge Gluing, Binding, and Finishing Machine, Portoghese, A. Jerome
90
25
1970
Operator Training Manual for Basic Sewing Machine, Parrish, Jimmy F. and Randall, Nicholas E.
210
25
1971
Operator Training Manual for Assembly Sewing, Randall, Nicholas E. and Parrish, Jimmy F
211
25
1971
Operator Training Manual for Cushion Assembly Sewing, Randall, Nicholas E. and Ford, Travis
212
25
1971
Operator Training Manual for Sewing Box and Kick-Pleat Skirts, Randall, Nicholas E.
213
25
1971
Operator Training Manual for Zipper Machine, Ford, Travis and Randall, Nicholas E.
215
25
1971
Operator Training Manual for Sewing Double Welting, Randall, Nicholas E.
216
25
1971
Operator Training Manual for Double Top Stitch Machine, Randall, Nicholas E.
217
25
1971
Operator Training Manual for Webbing, Drumheller, Arthur O.
240
26
1971
Operator Training Manual for Eight-Way Hand-Tied Coil Springs, Drumheller, Arthur O.
241
26
1971
Operator Training Manual for Zig-Zag Springs and Drop-In Construction Units, Drumheller, Arthur O.
242
26
1971
Operator Training Manual for Burlaping and Attaching Edge Rolls, Drumheller, Arthur O.
243
26
1971
Reprints
Recommended Noise Compliance Plan for Evaluation by Industry in Developing an Effective Hearing Conservation Program, Creel, W. C. "Billy" and Royster, L. H.
SAH-1
26
1973
Listing of Audio Visual Safety Aids Available for Loan, Rent, or Purchase, Cecich, Thomas F.
SAH-2
26
1973
Designing for OSHA: Operator Safety on Pinch-Point Machines, Sutter, Ron
SAH-3
26
1973
Circular Saws
SAH-4
26
1973
Excerpts of Some of the Articles and Sections of the National Electrical Code, NFPA No. 70, 1971, Adopted by OSHA Standards (Section 1910.309) Phase 1 and Phase 2, Creel, W. C.
SAH-5
26
1973
Excerpts of Some of the Articles and Sections of the National Electrical Code, NFPA No. 70, 1971, Adopted by OSHA Standards (Section 1910.309) Phase 1 and Phase 2, Brooks, John C.
SAH-5
26
1977
Principles and Techniques of Mechanical Guarding
SAH-6
26
1973
Materials Science and Engineering
Experiments in Materials Engineering
26
1979
Graduate Studies in Materials Engineering
26
1983
Mechanical and Aerospace Engineering
Biomass Farming for Fuel, Smetana, Frederick O.
26
1976
Economic and Performance Design Study of Solar Preheaters for Domestic Hot Water Heaters in North Carolina, Jones, Clay B. and Smetana, Frederick O.
26
1976
New Wind Energy Conversion System, Smetana, Frederick O.
26
1975
Solar Assisted Heat Pumps: A Possible Wave of the Future, Smetana, Frederick O.
26
1975
Minerals Research Laboratory
Ball Mill Grinding and Iron Minerals Flotation From Silica Sand, Redeker, I. H. and Malghan, S. G.
76-10-P
26
1976
Beneficiation and Conservation of North Carolina Phosphates, Redeker, Immo H.
76-5-P
26
1976
Beneficiation of Olivine for Foundry Sand by Calcining, Redeker, Immo H.
Report No. MRL-2
26
1972
Comparison of Olivine Beneficiation Techniques, Lewis, Robert M.
Report No. MRL-1
26
1972
Concentration of Spodumene From North Carolina Pegmatite Ores, Redeker, Immo H.
77-11-P
26
1977
Effect of Process Variables in Feldspar Flotation Using Non-Hydrofluoric Acid System, Malghan, Subhas G.
78-3-P
26
1978
Flotation of Feldspar, Spodumene, Quartz and Mica From Pegmatites in North Carolina, USA, Redeker, Immo H.
77-3-P
26
1977
Flotation of Fine Ball Mill Ground Spodumene From North Carolina Ores, Redeker, Immo H.
Report No. MRL-5
26
1975
Grinding: An Overview of Operation and Design, Schlanz, John W.
87-31-P
26
1987
Hydroplane Wet Mica Grinding Principle: Initial Tests with a Full-Sized Disc Mill, Neal, J. Philip
85-28-P
27
1985
Laboratory Notes on Potential Western North Carolina Soapstone Resources, Bentzen, Edwin H., III
Laboratory Notes 1
27
1975
Manufacture of Reconstituted Talc Crayons for Marking Steel for Fabrication, Tanner, James T., Jr.
86-12-P
27
1986
North Carolina Phosphates, Redeker, Immo H.
86-13-P
27
1986
Phosphate Mining in North Carolina, Redeker, Immo H. and Wright, Thomas J.
27
1978
Plant and Laboratory Practice in Nonmetallic Mineral Flotation, Redeker, Immo H. and Bentzen, Edwin H., III
87-2-P
27
1987
Possible Recovery of Heavy Minerals From Phosphate Tailings, Lewis, Robert M.
78-2-P
27
1978
Recovery of Heavy Minerals From North Carolina Phosphate Tailings, Lewis, Robert M.
Report No. MRL-4
27
1974
Report of the Advisory Committee Mid-Winter Meeting
27
1958
Role of Frothers in Coal Flotation, Seitz, R. A. and Kawatra, S. K.
86-18-P
27
1986
Role of Nonpolar Oils as Flotation Reagents, Seitz, R. A. and Kawatra, S. K.
86-28-P
27
c1986
Sizing with a Lewis Hydrosizer in Closed Circuit Grinding and Batch Flotation, Lewis, Robert M.
85-31-P
27
1985
Upgrading of Taconite Concentrate to Direct Reduction Specifications by Flotations, Sandvik, K. L. and Dybdahl, B. A.
79-1-P
27
1979
North Carolina Biotechnology Center
Developing the Biotechnology Component of Engineering: Needs and Opportunities
27
1983
Nuclear Engineering
American Nuclear Society Student Conference
27
1971
Cogeneration and North Carolina, Kohl, Jerome, Ed.
27
1979
First Temple of the Atom
27
undated
Nuclear Engineering Graduate Studies
27
1991
Prospectus on the Nuclear Engineering Department of North Carolina State University
27
1984
Tecnological Applications & Experimental Tecniques of Nuclear Energy
Bulletin No. 1
27
1968
Transactions of the Joint Nuclear Instrumentation Symposium
28
1961
Operations Research
Graduate Programs in Operations Research
28
undated
Q-GERT Simulation Study of the Faculty Population in a University, Bazzi, Muna M. and Elmaghraby, S. E.
OR Report No. 114
28
1977
Power Semiconductor Research Center
Power Semiconductor Devices for Variable Frequency Drives, Baliga, B. J.
PSRC Document: Tr-93-026
28
1993
Undergraduate Programs
College of Engineering Undergraduate Programs
28
c1994
College of Engineering Undergraduate Programs
28
1998
Some of Our Engineering Freshman are Missing!, Bland, George F. and Freedman, Mary D.
28
1986
Water Resources Research Institute
Agriculture and Man's Environment, Howells, David H.
28
1968
Assessment of Land Treatment Technology for Petroleum Refinery Sold Wastes, Pal, Dhiraj and Overcash, Michael R.
Report No. 141
28
1980
Assessment of Land Treatment Technology for Textile Mill Industry, Pal, Dhiraj and Overcash, Michael R.
Report No. 140
28
1979
Characterization and Land Application of Seafood Industry Wastewaters, Overcash, Michael R. and Pal, Dhiraj
Report No. 142
28
1980
Chowan River Project, Bond, Sharon, Cook Grover, and Howell, David H.
28
undated
Conservation of the Municipal Water Supply, Howells, David H.
28
1966
Effects of Ditching on the Mosquito Populations in Some Sections of Juncus Salt Marsh in Carteret County, North Carolina, Lasalle, Richard N. and Knight, Kenneth L.
Report No. 82
28
1973
Effects of Land Use on Municipal Watersheds, Maki, T. Ewald and Hafley, William L.
Report No. 71
28
1972
Environmental Factors Promoting and Regulating N 2 Fixing Blue-Green Algal Blooms in the Chowan River, North Carolina, Paerl, Hans W.
28
1982
Farm Benefits From Water Conservation and Management, Howells, David H.
28
1967
For a Cleaner Environment and More Productive Land Put Wastewater to Use, Rubin, A. R. and Stewart, James M.
28
1976
Gathering of the Waters, Stewart, James M.
Circular No. 564
28
1973
Inventory of Active Water Resources Research Projects in North Carolina
Appendix B - Research Plan
28
1966
Inventory of Active Water Resources Research Projects in North Carolina
Report No. 4
29
1967
Inventory of Active Water Resources Research Projects in North Carolina, Howells, David H.
Report No. 4 (Revised)
29
1969
Loss of Fertilizer Nutrients From Soils to Drainage Waters: Part I. Studies on Grassed Watersheds in Western North Carolina. Part II. Nitrogen Concentrations in Shallow Groundwater of the North Carolina Coastal Plain, Kilmer, V. J., Gilliam, J. W., Joyce, R. T., and Lutz, J. F.
Report No. 55
29
1972
Movement and Storage of Water in North Carolina Soils and the Role of the Soil in Determining Water Quality, Lutz, J. Fulton
Report No. 24
29
1969
Perception of Water Resource Information Sources and Educational Needs by Local Officials and Special Interest Groups, Stewart, James M. and Howell, David H.
Report No. 47
29
1971
Phosphorus Dynamics in a North Carolina Piedmont Reservoir, Kuenzier, Edward J. and Greer, Linda E.
Report No. 154
29
1980
Planning Water Needs for the Future, Howells, David H.
29
1967
Recovery of Warp Sizes, Jennings, Harley Y.
Summary Report
29
1966
Second Homes in North Carolina: An Analysis of Water Resource and Other Consequences of Recreational Land Development, Burby, Raymond J.
Report No. 150
29
1979
Some Important Considerations for the Land Application of Wastewater, Rubin, A. R., Steward, James M., and Carlile, Bobby L.
29
c1977
Some Features in the Diurnal Variations of Rain and Wind over North Carolina, by W.J. Saucier
Accession 2012.0238
56
1972 June
Summary of Water Resource Problems and Research Needs in North Carolina, Howells, David H.
29
1970
Survey of Water Utilization and Waste Control Practices in the Southern Pulp and Paper Industry, Kleppe, Peder J. and Rogers, Charles N.
29
1970
Textile Wastes, Jennings, Harley Y.
29
1966
Trends in Public and Private Support for Water Pollution Control, Howells, David H.
29
1966
University Response to State and Local Water Resources Research Needs, Howells, David H.
29
1969
Water Resource and Man's Environment, Howells, David H.
29
1966
Water Resources Problems and Research Needs of North Carolina
29
1966
Water Resources Problems and Research Needs of North Carolina, Howells, David H.
Report No. 2 (Revised)
29
1972
Water Resources Problems and Research Needs of North Carolina, Howells, David H.
29
1974
Water Resources Problems and Research Priorities of North Carolina
29
c1981
Water Resources Research in North Carolina, Howells, David H.
30
1966
Water Resources Research Interests in the Senior Colleges and Universities of North Carolina
30
1966
Water Resources Research Interests in the Senior Colleges and Universities of North Carolina
Report No. 3
30
1967
Water Resources Research Interests in the Senior Colleges and Universities of North Carolina
Report No. 3 (Revised)
30
1969
Reprints
UA 105.200 Series 3
3.0 Linear feet
1901-1999
6 archival boxes
Reprint bulletins
Kaolins of North Carolina, Stuckey, Jasper L. -- ( North Carolina State College Record, Vol. 48, No. 2)
No. 1
30
1947
Automatic Plotting of Electrostatic Fields, Green, Paul E., Jr.
No. 2
30
1949
Opportunity for Furthering Research in Chemical Engineering Through a Department of Engineering Research, Van Note, W. G.
No. 3
30
1949
Fields of Parallel Vectors in Projectively Flat Spaces, Levine, Jack
No. 4
30
1949
Time-Constant Selection in the Application of RC Differentiating and Integrating Circuits, Jeffries, Robert J.
No. 5
30
1950
Metallurgy in the Mechanical Engineering Curriculum, Guy, A. G.
No. 6
30
1950
Predicting Carbon Penetration Curves in Carburizing, Guy, A. G.
No. 7
30
1950
Analysis of Interstitial Diffusion Using Activity Methods, Guy, A. G.
No. 8
30
1950
Fields of Parallel Vectors in Conformally Flat Spaces, Levine, Jack
No. 9
30
1950
Velocity-Acceleration Response From a Seismic Pick-Up Via Controlled Damping, Jeffries, Robert J.
No. 10
30
1950
Heat Resistance of Laminated Plastics, Schoenborn, E. M. and Sieffert, L. E.
No. 11
30
1950
Comparative Fire Resistance of Lightweight and Standard Structural Clay Tile, Bell, W. C. and Couch, R. L.
No. 12
30
1950
Thermal Conductivity of Homogeneous Materials: Determination by an Unsteady-State Method, Beatty, K. O., Jr., Armstrong, A. A., and Schoenborn, E. M.
No. 13
30
1950
Classification of Collineations in Projectively and Affinely Connected Spaces of Two Dimensions, Levine, Jack
No. 14
30
1950
Measurement of Smoke, Beatty, K. O., Jr. and Deas, James E., Jr.
No. 15
30
1950
Condensation on Vertical Finned Tubes, Forbes, Allan V. and Beatty, K. O., Jr.
No. 16
30
1951
Nuclear Reactor Project at North Carolina State College, Beck, Clifford K.
No. 17
30
1951
North Carolina Industry - Its Strength and Problems, Van Note, William G.
No. 18
30
1951
Undergraduate Nuclear Engineering Curriculum at North Carolina State College, Beck, Clifford K.
No. 19
30
1951
Obtaining Power From Nuclear Reactors, Beck, Clifford K.
No. 20
30
1951
Collineations in Weyl Spaces of Two Dimensions, Levine, Jack
No. 21
30
1951
Thermal Properties of Certain Laminated Plastics, Schoenborn, E. M., Armstrong, A. A., Jr., and Beatty, K. O., Jr.
No. 22
30
1951
An Analysis of Grounding Banks to Balance Distribution Feeder Voltages, Long, Leonard W.
No. 23
30
1951
Heat Transfer From Humid Air to Metal Under Frosting Conditions, Beatty, K. O., Jr., Finch, E. B., and Schoenborn, E. M.
No. 24
30
1951
Collineations in Generalized Spaces, Levine, Jack
No. 25
30
1951
Long-Time Load Tests Show Semi-Silica Superior, Wilson, Hugh H., Jr.
No. 26
30
1951
Development of Large Lightweight Structural Clay Building Units, Bell, W. C. and McGinnis, D. H.
No. 27
30
1951
Uses and Limitations of a Low-Power Nuclear Reactor, Beck, Clifford K.
No. 28
30
1952
Proper Pelletizing Technique-Key to Efficient Sintering of Aggregate, Bell, W. C.
No. 29
30
1952
Motions in Linearly Connected Two-Dimensional Spaces, Levine, Jack
No. 30
30
1952
Performance of Perforated-Plate Distillation Columns, Arnold, D. S., Plank, C. A., and Schoenborn, E. M.
No. 31
30
1953
Partition Function for Relating Entropy to Disorder in the Melting of Pure Metals, Lee, John F.
No. 32
30
1953
Effect of Partial Devitrification on the Electrical Resistivity of Sodium-Bearing Glasses, Joyner, Bobby L. and Bell, William C.
No. 33
30
1953
Electron-Tube Voltmeter Concepts in the Mid-Frequency Range, Hoadley, George B.
No. 34
30
1953
Themodynamics of Critical Phenomena in Gases, Lee, J. F.
No. 35
30
1953
Oxidation of Cotton Kier Wastes, Nemerow, Nelson L.
No. 36
30
1953
Gas Turbine as a Combustion Topping Unit, Lee, J. F.
No. 37
30
1953
Some Properties of Pyrophyllite as a Refractory Raw Material, Bell, William C., Gower, Irving W., and Hart, John R.
No. 38
30
1954
Commutatorless D-C Tachometer, Eckels, A. R. and Peck, Walter R.
No. 39
30
1954
Recent Developments in the Building Brick Industry of the Southeastern United States, Bell, William C.
No. 40
30
1954
Calculation of Impounded-Storage Requirements, Smallwood, Charles, Jr., Wyndham, Herbert B., and Cote, Daniel N.
No. 41
30
1954
Thermodynamic Properties of Liquid Sodium, Lee, J. F.
No. 42
30
1954
Nucleation and Growth of Graphite in Steel, Brown, Floyd
No. 43
30
1954
Oxidation of Enzyme Desize and Starch Rinse Textile Wastes, Nemerow, Nelson L.
No. 44
30
1954
Dye Displacement Technique for Velocity Distribution Measurement, Ferrell, J. K., Beatty, K. O., Jr., and Richardson, Frances M.
No. 45
30
1955
Empirical Equations for the 60-Cycle Spark-Over Gradients in Commercial Oil, Gauster, W. P.
No. 46
30
1955
Some Notes on the Relation Between the Elastic Moduli of Anisotropic Crystallites and Quasi-Isotropic Polycrystalline Aggregates, Stadelmaier, Hans H.
No. 47
30
1955
Influence of Thermochemical Reactions in Firing Rates, Bell, William C.
No. 48
30
1955
How Radiotracers are Used in Measuring Fluid-Velocity Profiles, Richardson, Frances M., Lamonds, H. A., Ferrell, J. K., and Beatty, K. O., Jr.
No. 49
30
1955
Vibratory Compacting of Metal and Ceramic Powders, Bell, William C., Dillender, Richard D., Lominac, Harold R., and Manning, Edward G.
No. 50
30
1956
Use of Pyrophyllite in Castable and Plastic Refractories, Gower, Irving W. and Bell, William C.
No. 51
30
1956
Hysteresis of the Cobalt Transformation in Thin Films, Stadelmaier, H. H. and Hock, R. C.
No. 52
30
1956
Densities of Liquid-Acetone-Water Solutions up to Their Normal Boiling Points, McAllister, R. A. and Thomas, K. T.
No. 53
30
1957
Surface Tension of Acetone-Water Solutions up to Their Normal Boiling Points, McAllister, R. A. and Howard, Katherine S.
No. 54
31
1957
Ternary Carbides of Transition Metals with Aluminum and Magnesium, Huetter, L. J. and Stadelmaier, H. H.
No. 55
31
1958
Viscosities and Densities of Methanol-Toluene Solutions up to Their Normal Boiling Points, Hammond, L. W., Howard, Katherine S., and McAllister, R. A.
No. 56
31
1958
Higher Oxides of Silver, Graff, William S. and Stadelmaier, H. H.
No. 57
31
1958
Solubility of Benzene in Water, Arnold, D. S., Plank, C. A., Erickson, E. E., and Pike, F. P.
No. 58
31
1958
Viscosity of Acetone-Water Solutions up to Their Normal Boiling Points, Howard, Katherine S. and McAllister, R. A.
No. 59
31
1958
Formation of a Ternary Carbide During the Attack of Iron- Carbon Alloys by Molten Zinc, Huetter, Leo J. and Stadelmaier, H. H.
No. 60
31
1959
Viscosities and Densities of Benzene-Acetic Acid Solutions up to Their Normal Boiling Points, Howard, K. S., Hammond, L. W., McAllister, and Pike, F. P.
No. 61
31
1959
Desiccation and Density of Acetone, Howard, K. S. and Pike, F. P.
No. 62
31
1959
Influence of Approach Boundary Layer Thickness on Premixed Propane-Air Flames Stabilized in a Sudden Expansion, Snyder, William T.
No. 63
31
1959
Ternary Carbides of the Transition Metals Nickel, Cobalt, Iron, Manganese with Zinc and Tin, Stadelmaier, H. H. and Huetter, L. J.
No. 64
31
1959
On the Application of Macmahon Diagrams to Certain Problems in the Multiplication of Monomial Symetric Functions, Levine, Jack
No. 65
31
1959
Vapor Pressure and Boiling Point of Titanium Tetrachloride, Pike, F. Philips and Foster, Clifford T., Jr.
No. 66
31
1959
Viscosities and Densities of Acetone-Benzene and Acetone-Acetic Acid Systems up to Their Normal Boiling Points, Howard, Katherine S. and Pike, F. Philips
No. 67
31
1959
Effect of Electrolytic Gas Evolution on Heat Transfer, Mixon, F. O., Chon, Wan Yong, and Beatty, K. O., Jr.
No. 68
31
1959
Miscellaneous Notes: Note on the Number of Pairs of Non-Intersecting Routes, Levine, Jack
No. 69
31
1960
Patterns in Turbulent Flow in the Wall-Adjacent Region, Richardson, F. M. and Beatty, K. O.
No. 70
31
1960
Laminar Skin Friction and Heat Transfer on Flat Plates with Wedge-Shaped Grooves in Flow Direction, Irvine, T. F., Jr. and Eckert, E. R. G.
No. 71
31
1960
Method of Measuring Total Hemispherical Emissivities at Low Temperatures - Results for Pure Iron From 300 to 500 Degrees Rankine, Brandt, James A., Irvine, Thomas F., Jr., and Eckert, E. R. G.
No. 72
31
1960
Nitrides of Iron with Nickel, Palladium, and Platinum, Stadelmaier, H. H. and Fraker, A. C.
No. 73
31
1960
Differentiation of Singular Integrals of Cauchy Type, Struble, Raimond A.
No. 74
31
1960
Six-Part Survey Rocket Heat-Transfer Literature, Irvine, Thomas F., Jr., ed.
No. 76
31
1960
Cobalt-Rich Ternary Alloys with Tin and Carbon, Huetter, L. J., Stadelmaier, H. H., and Hardy, W. K.
No. 77
31
1960
Condensation on a Horizontal Rotating Disk, Nandapurkar, S. S. and Beatty, K. O., Jr.
No. 78
31
1960
Successive Approximation Applied to Quadrature Formulas, Struble, R. A. and Miller, R. R.
No. 79
31
1960
Activation Energy for Diffusion of 133 Xe Through MgO-Ni Cermet Compacts, Moody, W. E., Whitehead, W. D., and Kriegel, W. W.
No. 80
31
1961
Accelerated Corrosion in Aluminum-Silver Alloys, Stadelmaier, H. H. and Whitener, E. M.
No. 81
31
1961
Geometry of the Orbits of Artificial Satellites, Struble, Raimond A.
No. 82
31
1961
Sampling Errors in the X-Ray Fluorescent Determination of Titanium in a High Temperature Alloy, Stoops, Robert F. and McKee, Keith H.
No. 83
31
1961
Geometrical Derivation of the Satellite Equations, Struble, Raimond A.
No. 84
31
1961
Iron Rich Side of the Iron-Zinc System, Stadelmaier, H. H. and Bridgers, R. K.
No. 85
31
1961
Microstructural Features and Dislocations on Thermally Etched Sapphire Surfaces, Palmour, Hayne, III, DuPlessis, John J., and Driegel, W. Wurth
No. 86
31
1961
General Perturbational Solution of the Harmonically Forced Van Der Pol Equation, Struble, Raimond A. and Fletcher, John E.
No. 87
31
1962
Barium-Iron-Oxide with the Perovskite Structure, Derbyshire, S. W., Fraker, A. C., and Stadelmaier, H. H.
No. 88
31
1962
Thermodynamics of the Ideal r-Times Ionized Monatomic Gas, Truitt, R. W. and Perkins, J. N.
No. 89
31
1962
Development and Use of Maximum-Car Technique for Measuring Travel Time, Cribbins, P. D., Horn, J. W., and Vick, C. E.
No. 90
31
1962
Proposed System for the Direct Conversion of Re-Entry Thermal Energy Into Electric Energy, Truitt, R. W.
No. 91
31
1962
Slagging Failure of Refractories in Cement Rotary Kilns, Mehta, P. K.
No. 92
31
1962
Effects of Commercial Roadside Development on Traffic Flow in North Carolina, Horn, J. W., Cribbins, P. D., Blackburn, J. D., and Vick, C. E., Jr.
No. 93
31
1961
Theory of the Ettingshausen Cooler, El-Saden, M. R.
No. 94
31
1962
Statical Hardness Tester for Measuring the Vectorial Hardness of Single Crystal Faces, Hofer, Gerhard
No. 95
31
1963
Class of Linear Magnetohydrodynamic Flows, El-Saden, M. R.
No. 96
31
1963
Viscous Compressible and Incompressible Flow in Slender Channels, Williams, James C., III
No. 97
31
1963
Comments on "Angle of Attack and Sideslip From Pressure Measurements on a Fixed Hemispherical Nose", Smetana, Frederick O.
No. 98
31
1963
Thermal Ionization Behind Strong Shock Waves, Truitt, Robert W.
No. 99
31
1963
Chemical Etching of Defect Structures in Alumina-Rich Spinel Single Crystals, McBrayer, R. Douglas, Palmour, Hayne, III, and Mehta, Povindar Kumar
No. 100
31
1963
Review of Code Requirements for Torsion Design, Fisher, Gordon P. and Zia, Paul
No. 101
31
1964
Exact Solutions of Gas-Particle Nozzle Flows, Hassan, Hassan A.
No. 102
31
1964
Some Geologic Factors in Highway Slope Failures in North Carolina, Leith, C. J. and Gupton, C. P.
No. 103
31
1964
Phase Relations in the System Uranium-Carbon-Oxygen, Stoops, Robert F. and Hamme, John V.
No. 104
31
1964
Reply by Author to K. N. C. Bray, Truitt, Robert W.
No. 105
31
1964
Heat-Mass Analogy for Fission-Product Deposition From Gas Streams, Ozisik, M. N.
No. 106
31
1964
Ternary Borides with the Cubic Chromium Carbide Structure, Stadelmaier, H. H.
No. 107
31
1964
Approach to the Measurement of Air Data Parameters for Guidance and Navigation During Atmospheric Reentry, Smetana, Frederick O.
No. 108
31
1964
Pressure Sintered Alumnia Bicrystals, Davis, M. P.
No. 109
31
1965
Heat Transfer, Ferrell, J. K. and Stahel, E. P.
No. 110
31
1965
Alloyed and Diffused High-Low Junctions in Silicon, Lade, R. W.
No. 111
31
1965
Velocity of Sound Measurements in High-Pressure Steam, Woodburn, James
No. 112
31
1965
Results of a Research Programme to Develop the Aerodynamic Configuration of a Pitot-Static Tube Capable of Accurate Operation to Mach Number 5 and 150,000 Feet, Smetana, Frederick O.
No. 113
31
1965
Radiation Experiment Provides New Information Concerning Defects on Silicon Surfaces, Bostian, C. W. and Manning, E. G.
No. 114
31
1965
Correlation of the Sudden Freezing Point in Nonequilibrium Nozzle Flows, Williams, James C., III
No. 115
31
1965
Comments on "Acoustic-Backing Techniques for Transducers and Radiators", Royster, L. H.
No. 116
32
1965
Heat Transfer, Ferrell, J. K. and Stahel, E. P.
No. 117
32
1966
On the Validity of the Boltzmann Boundary Conditions at Semiconductor Interfaces, Lade, R. W. and Poncelet, C. G.
No. 118
32
1966
Predicting the Effective Dynamic Coupling Coefficient of the Flextensional Transducer (Preliminary Design Considerations), Royster, L. H.
No. 119
32
1966
On the Upstream Length of Turbulent Boundary-Layer Separation, Williams, James C., III
No. 120
32
1966
Barium-Iron-Oxygen Compounds with Varying Oxygen Content and Iron Valence, Fraker, Anna Clyde
No. 121
32
1966
Experiments on Transition Regime Flow Through a Short Tube with a Bellmouth Entry, Carley, C. T., Jr.and Smetana, Frederick O.
No. 122
32
1966
Effect of Linear Taper on the Lowest Natural Extensional Frequency of Elastic Arcs, Royster, L. H.
No. 123
32
1966
Transient Polarization in Insulating CdS, Matthews, N. F. J. and Warter, Peter J., Jr.
No. 124
32
1966
Variation of Dielectric Constant and Spontaneous Strain with Density in Polycrystalline Barium Titanate, Stadelmaier, H. H. and Derbyshire, S. W.
No. 125
32
1966
Grain Boundary Sliding in Alumina Bicrystals, Davis, M. P. and Palmour, Hayne, III
No. 126
32
1966
Fractographic Evidence of Multiple Slip in Deformed Hot-Pressed Spinel, Choi, Dong M. and Palmour, Hayne, III
No. 127
32
1966
Ultimate Load Capacity of Prestressed Concrete Columns, Zia, Paul F. and Moreadith, F. L.
No. 128
32
1966
Multiple Slip Processed in Magnesium Aluminate at High Temperatures, Palmour, Hayne, III
No. 129
32
1967
Manufacturing Processes in Biomedical Engineering, Harder, John H.
No. 130
32
1967
On the Stored Energy of Planar Apertures, Rhodes, Donald R.
No. 131
32
1967
Heat Transfer, Ferrell, J. K. and Stahel, E. P.
No. 132
32
1967
In-Plane Inextensional Vibrations of a Circular Ring with a Time-Dependent Displacement at the Boundaries, Clayton, M. H. and Royster, L. H.
No. 133
32
1967
Low-Rate Gas Flow Meter, Smetana, Frederick O.
No. 134
32
1967
Gas Prism for Light Beams, Tischer, F. J.
No. 135
32
1967
Gas-Lens Type Deflection Struction for Light Beams, Tischer, F. J.
No. 136
32
1967
Slot Compensation in a Standing-Wave Meter at Millimeter Waves, Tischer, F. J.
No. 137
32
1968
Heat Transfer, Stahel, Edward P. and Ferrell, James K.
No. 138
32
1968
Microstructure and Room-Temperature Mechanical Properties of Hot-Pressed Magnesium Aluminate as Described by Quadratic Multivariable Analysis, Chay, Dong M., Palmour, Hayne, III., and Kriegel, W. W.
No. 139
32
1968
Symmetric Circuits and the Concept of Logical Potential, Bell, N. R.
No. 140
32
1968
Pressure Sensitivity in Ionization Gauges, Smetana, Frederick O. and Daggerhart, James A., Jr.
No. 141
32
1968
Vacuum Hot-Pressing of Magnesium Aluminate Spinel, Rummler, Donald R. and Palmour, Hayne, III
No. 142
32
1968
Schlieren Prism for Light Beams, Shankle, A. T. and Tischer, F. J.
No. 143
32
1968
High-Temperature Cermets: Part I, Compatibility, Part II, Wetting and Fabrication, Manning, Charles R., Jr. and Stoops, Robert F.
No. 144
32
1968
New Type of H-Guide Structure, Propst, R. H. and Tischer, F. J.
No. 145
32
1968
Heat Transfer, Stahel, Edward P. and Ferrell, James K.
No. 146
32
1969
Liquid Phase Extrusion Hot-Pressing, Stoops, Robert F.
No. 147
32
1969
Energy Bands in One-Dimensional Aperiodic Crystals, Williams, F. W. and Matthews, N. F. J.
No. 149
32
1969
H-Guide with Laminated Dielectric, Tischer, F. J.
No. 150
32
1969
Heat Transfer, Stahel, Edward P. and Ferrell, James K.
No. 151
32
1970
High-Temperature Deformation of Alumina Double Bicrystals, Becher, Paul F. and Palmour, hayne, III
No. 152
32
1970
Interference Between Gravity Wells - Steady State Flow, Kashef, Abdel-Aziz I.
No. 153
32
1971
On the Management of Ground Waters in Coastal Aquifers, Kashef, Abdel-Aziz I.
No. 154
32
1971
On a New Condition for Physical Realizability of Planar Antennas, Rhodes, Donald R.
No. 155
32
1972
On an Optimum Line Source for Maximum Directivity, Rhodes, Donald R.
No. 156
32
1972
On the Aperture and Patter Space Factors for Rectangular and Circular Apertures, Rhodes, Donald R.
No. 157
32
1972
Rate Controlled Sintering of Fine-Graned Al² O³, Huckabee, M. L. and Palmour, Hayne, III
No. 158
32
1973
Studies in Densification Dynamics, Palmour, Hayne, III and Huckabee, M. L.
No. 159
32
1973
Faculty reprints
Center for Communication and Signal Processing
Image Sequence Compression Using a Pel-Recursive Motion-Compensated Technique, Moorhead, R. J., II, Rajala, S. A., and Cook, L. W.
32
1987
Using Convex Set Techniques for Combined Pixel and Frequency Domain Coding of Time-Varying Images, Santago, P. and Rajala, S. A.
32
1987
Center for Sound and Vibration
Effect of Hydrostatic Pressure Fields on the Structural and Acoustic Response of Cylindrical Shells, Keltie, R. F.
32
1986
Effect of Modal Coupling on the Acoustic Power Radiation From Panels, Keltie, R. F. and Peng, H.
32
1987
On the Acoustic Power Radiated by Line Forces on Elastic Beams, Keltie, R. F. and Peng, H.
32
1985
Chemical Engineering
Adsorption of Proteins to Gas-Liquid Interfaces, Guzman, Roberto Z., Carbonell, Ruben G., and Kilpatrick, Peter K.
32
1986
Affinity Surfactants as Reversibility Bound Ligands for High-Performance Affinity Chromatography, Torres, J. L., Guzman, R., Carbonell, R. G., and Kilpatrick, P. K.
32
1987
Cluster-Variation Calculation for Random-Field Systems: Application to Hydrogen in Niobium Alloys, MacGillivray, I. R., Soteros, C. E., and Hall, C. K.
32
1987
Coal Gasification in a Pilot-Scale Fluidized Bed Reactor. 3. Gasification of a Texas Lignite, Rhinehart, R. Russell, Felder, Richard M., and Ferrell, James K.
32
1987
Effect of Oil Type on Liquid Crystalline Phase Behavior in Sodium n-Dodecanote-Water-Oil Mixtures, Kilpatrick, Peter K. and Bogard, Mark A.
32
1988
Effects of Packing Density on the Gas-Transport Properties of Poly(phenolphthalein phthalate)s, Sheu, F. R. and Chern, R. T.
32
undated
Equation of State for Chair Molecules: Continuous-Space Analog of Flory Theory, Dickman, Ronald and Hall, Carol K.
32
1986
Fate of Polynuclear Aromatic Compounds (PNAs) in Soil-Plant Systems, Sims, R. C. and Overcash, M. R.
32
1983
Hydrodynamics of Trickling Flow in Pact Beds: Part I: Conduit Models, Saez, A. E., Carbonell, R. G., and Levec, J.
32
1986
Hydrodynamics of Trickling Flow in Pact Beds: Part II: Experimental Observations, Levec, J., Saez, A. E., and Carbonell, R. G.
32
1986
Low-Nuclearity Osmium Carbonyl Clusters on Magnesia: Molecular Catalysts for CO Hydrogenation, Lamb, H. Henry, Krause, Theordore R., and Gates, Bruce C.
33
undated
Microstructure in n-Alkane-Water-Electrolyte Mixtures with Small Ethoxylated Alcohol Amphiphiles, Kilpatrick, Peter K., Davis, H. Ted, Scriven, L. E., and Miller, Wilmer G.
33
1986
Molecular Organoosmium Chemistry and Catalysis on the Basi Magnesium Oxide Surface, Lamb, H. Henry and Gates, Bruce C.
33
1986
Molecular Osmium and Ruthenium Carbonyl Clusters on Conventionally Prepared Carbon Monoxide Hydrogenation Catalysts, Lamb, H. Henry, Krause, Theordore R., and Gates, Bruce C.
33
1986
Ohmic Distortion of Reversible Voltammograms in Thin-Layer Cells, Fedkiw, Peter S., Weidner, John W., and Kang, M. Paul
33
1988
On Creating Creative Engineers, Felder, Richard M.
33
1987
On the Pressure Equation for Chain Molecules, Honnell, K. G., Hall, C. K., and Dickman, R.
33
1987
Periodic Electrodeposition on a Planar Electrode, Fedkiw, Peter S. and Brouns, Daniel R.
33
1988
Selectivity Changes in Electrochemical Reaction Sequences by Modulated Potential Control, Fedkiw, Peter S. and Scott, William D., Jr.
33
1984
Simulation/Optimization of a Specialties Plant, Felder, R. M., Kester, P. M., and McConney, J. M.
33
1983
Transport of Carbon Dioxide and Methane in Glassy Aromatic Polyesters, Sheu, F. R., Chern, R. T., Stannett, V. T., and Hopfenberg, H. B.
33
1988
Transport of Gases in Unmodified and Aryl-Brominated 2,6-Dimethyl-1,4-Poly (Phenylene Oxide), Chern, R. T., Sheu, F. R., Jia, L., Stannett, V. T., and Hopfenberg, H. B.
33
1987
Civil Engineering
Analysis of a Family of Unstable Lattice Orientations in (110) Channel Die Compression, Havner, K. S. and Chidambarrao, D.
33
1987
Analysis of Load Deflection Response of Laterally Loaded Piers Using DMT, Gabr, Mohammed A. and Borden, Roy H.
33
1988
C/SCS Criteria for Measuring Progress Under Inflation, Farid, Foad and Karshenas, Saeed
33
1986
Effect of Wave Breaking on the Wave Energy Spectrum, Tung, C. C. and Huang, N. E.
33
1987
Effect of Wave Breaking on Wave Spectrum in Water of Finite Depth, Tung, C. C. and Huang, N. E.
33
1987
Evaluation of Programming Languages and Language Features for Engineering Software Development, Holtz, Neal M. and Rasdorf, William J.
33
1988
Expert Systems in Highway Engineering: Progress and Potential Applications, Stone, John R., Bryson, Donald A., and Wentworth, James A.
33
1988
Extending DBMS's for Engineering Applications, Rasdorf, William J.
33
1987
Fair and Reasonable Markup (FaRM) Pricing Model, Farid, Foad and Boyer, L. T.
33
1986
Generic Design Standards Processing in an Expert System Environment, Rasdorf, William J. and Wang, TsoJen E.
33
1988
Influence of Base Resistance on the Lateral Load-Deflection Behavior of Rigid Piers in Sand, Gabr, Mohammed A. and Borden, Roy H.
33
1987
Intersection Advisor: An Expert System for Intersection Design, Bryson, Donald A., Jr. and Stone, John R.: c1985
33
Lateral Response of Piers in Sloping Soil Profiles, Gabr, Mohammed A. and Borden, Roy H.
33
1989
On Finite Deformation of F.C.C. Crystals in (110) Channel Die Compression, Chidambarrao, D. and Havner, K. S.
33
1988
On the Continuum Mechanics of Crystal Slip, Havner, K. S.
33
1985
Orthotropic Model of Concrete for Triaxial Stresses, Ahmad, Shuaib H., Shah, Surendra P., and Khaloo, A. R.
33
1986
Pore Pressure in Ocean-Floor Sands Under Random Waves, Rahman, M. S. and Layas, F. M.
33
1985
Pore Pressure Response of Earth Dams in Random Seismic Environment, Rahman, M. S. and Pal, S. K.
33
1984
Probabilistic Analysis for Wave-Induced Submarine Landslides, Rahman, M. S. and Layas, F. M.
33
1985
Sensitivity of Construction Contract Prices to Required Rate of Return and Retainage, Farid, Foad and Saadi, Hilal
33
undated
Shear Capacity of Reinforced High-Strength Concrete Beams, Ahmad, Shuaib H., Khaloo, A. R. and Poveda, A.
33
1986
Short Communication Response of Porous Beds Subjected to Random Waves, Layas, F. M. and Rahman, M. S.
33
1985
Site Impact Traffic Evaluation: Methodology and Microcomputer Methods, Stone, John R. and Bryson, Donald A.
33
1988
Spectrum of Breaking Waves in Deep Water, Tung, C. C. and Huang, N. E.
33
1987
Structural Properties of High Strength Concrete and its Implications for Precast Prestressed Concrete, Shah, S. P. and Ahmad, Shuaib H.
33
1986
Time Domain Identification of Element Matrices, Matzen, Vernon C.
33
undated
Time Domain Identification of Linear Structures, Matzen, Vernon C.
33
undated
Time Domain Identification of Reduced Parameter Models, Matzen, Vernon C.
33
undated
Computer Science
Adaptive Hashing, Hsiao, Yeong-Shiou and Tharp, Alan L.
33
1988
Architecture and Operation of the BLITZEN Processing Element, Davis, Edward W. and Reif, John H.
33
1988
Augmenting Path Algorithm for Linear Matroid Parity, Gabow, H. N. and Stallmann, M.
33
1986
Course on Software Engineering for Concurrent Systems, Tai, Kuo-Chung
33
1988
Debugging of Parallel and Distributed Software by Deterministic Execution, Tai, Kuo-Chung and Carver, Richard H.
33
1988
Determination of a General Economic Location Constant by Monte Carlo Simulation, Honeycutt, T. L., Grad, C. E., Jr., and Wilson, J. D.
33
1974
Journal of Telecommunication Networks, Chou, Wushow, ed.
33
1982
Measuring Errors in Operational Analysis Assumptions, Bengtson, Neal M.
33
1987
Net-Based Approach to the Synthesis of Nondeterministic Robot Plans, Bahler, Dennis R.
33
1988
Partial Order Based Characterization and Synthesis of Multi-Agent Cooperative Plans, Bahler, Dennis R.
33
1987
Recognizing Majority on a One-Way Mesh, Savage, Carla
33
1988
Sensitivity of the Stationary Distribution Vector for an Ergodic Markov Chain, Funderlic, R. E. and Meyer, C. D., Jr.
33
1986
Solving Some Combinatorial Problems on Arrays with One-Way Dataflow, Savage, Carla D., Stallmann, Matthias, and Perry, Jo Ellen
33
undated
Systolic Arrays with Embedded Tree Structures for Connectivity Problems, Ashtaputre, Sunil and Savage, Carla D.
33
1985
Systolic Design for Connectivity Problems, Savage, Carla
33
1984
Toward the Automated Synthesis of Nondeterministic Plans Using Generalized Condition/Event Nets, Bahler, Dennis R.
33
1988
Updating LU Factorizations for Computing Stationary Distributions, Funderlic, R. E. and Plemmons, R. J.
33
1986
Electric Power Research Center
Application of Sensitivity Factors for the Harmonic Analysis of Distribution System Reconfiguration and Capacitor Problems, Wickramasekara, M. G. and Lubkeman, David
33
undated
Applications of Knowledge-Based Programming to Power Engineering Problems, Taylor, Tim and Lubkeman, David
33
1988
Electrical and Computer Engineering
Adaptive Nonlinear Image Restoration by a Modified Kalman Filtering Approach, Rajala, Sarah A. and de Figueiredo, Rui J. P.
34
1981
Adaptive Robotic Tracking System Using Optical Flow, Luo, Ren C., Mullen, Robert E., Jr., and Wessell, Daniel E.
34
1988
AlGaAs Graded Index Lens for Integrated Optics, Yoshida, I. and Bedair, S. M.
34
1988
Analysis of a High-Voltage Merged p-i-n/Schottky (MPS) Rectifier, Baliga, B. Jayant
34
1987
Analysis of a Recursive Least Squares Hyperbolic Rotation Algorithm for Signal Processing, Alexander, S. T., Pan, T.-T., and Plemmons, R. J.
34
1988
Analysis of Nonlinear Behavior in Delta-Sigma Modulators, Ardalan, Sasan H. and Paulos, John J.
34
1987
Analytical Finite Precision Results for Burg's Algorithm and the Autocorrelation Method for Linear Prediction, Alexander, S. T. and Rhee, Z. M.
34
1987
Aspect Electro-physiologique de L'implant Cochleaire a Multi-Electrodes, White, M. and Merzinich, M.
34
1979, (French Translation) (See: Some Electrophysical Data Relevant to Excitation Control Techniques for a Cochlear Prosthesis)
Block Realization of Multidimentional IIR Digital Filters and Its Finite Word Effects, Ju, C.-J. and Alexander. W. E.
34
1987
Challenges in Advanced Semiconductor Technology in the ULSI Era for Computer Applications, Osburn, Carlton M. and Reisman, Arnold
34
1986
Comparison of the Noise Sensitivity of Nine QRS Detection Algorithms, Friesen, Gary M., Jannett, Thomas C., Afify, Manal E., Yates, Stanford L., Quint, Stephen R., and Nagle, H. Troy
34
undated
Compression Systems for Hearing Aids and Cochlear Prostheses, White, M. W.
34
1986
Computations of DSI (TASI) Overload as a Function of the Traffic Offered, Kou, K. Y., O'Neal, J. B., Jr., and Nilsson, A. A.
34
1985
Computer Analysis of Heterojunction and Graded Composition Solar Cells, Sutherland, Joseph E. and Hauser, John R.
34
1977
Computer Simulation of Digital Lightwave Links, Elrefaie, Aly E., Townsend, J. Keith, Romeiser, Malcolm B., and Shanmugan, K. Sam
34
1988
Continuous Room-Temperature Operation of an InGaAs-GaAs-AlGaAs Strained-Layer Laser, Yang, Y. J., Hsieh, K. Y., and Kolbas, R. M.
34
1987
Deep-Level and Profile Effects Upon Low-Noise Ion-Implanted GaAs MESFET's, Trew, Robert J., Khatibzadeh, M. Ali, and Masnari, Nino A.
34
1985
Design and Performance of Generalized Interconnection Networks, Bhuyan, Laxmi N. and Agrawal, Dharma P.
34
1983
Dynamic Multi-Sensor Data Fusion Systems for Intelligent Robots, Luo, Ren C., Lin, Min-Hsiung, and Sccherp, Ralph S.
34
1988
Effects of Processing Conditions on Negative Bias Temperature Instability in Metal-Oxide-Semiconductor Structures, Lu, D., Ruggles, G. A., and Wortman, J. J.
34
1988
Effects of Titanium Silicide Formation on Dopant Redistribution, Osburn, C. M., Brat, T., Sharma, D., Griffis, D., Corcoran, S., Lin, S., Chu, W.-K., and Parikh, N.
34
1988
Efficiency-Optimizing Permanent-Magnet Synchronous Motor Drive, Colby, Roy S. and Novotny, Donald W.
34
1988
Efficient Operation of Surfact-Mounted PM Synchronous Motors, Colby, Roy S. and Novotny, Donald W.
34
1987
Evaluating the Performance of Multicomputer Configurations, Agrawal, Dharam P., Janakiram, Virenda K., and Pathak, Girish C.
34
1986
Evaluation of Thin Oxides Grown by the Atomic Oxygen Afterglow Method, Ruzyllo, J., Hoff, A., and Ruggles, G.
34
1987
Evolution of MOS-Bipolar Power Semiconductor Technology, Baliga, B. Jayant
34
1988
Exploiting Bit Level Concurrency in Real-Time Geometric Feature Extractions, Liu, Wentai, Yeh, Ton-Fei, Batchelor, William E., and Cavin, Ralph
34
1988
Fast ARMA Transversal RLS Filter Algorithm, Ardalan, Sasan Houston and Faber, L. James
34
1988
Fast Method for Switch-Level Verification of MOS Circuits, Reeves, D. S. and Irwin, M. J.
34
1987
Fast Object-Oriented Procedure Calls: Lessons for the Intel 432, Gehringer, Edward F. and Colwell, Robert P.
34
1986
Fixed-Point Roundoff Error Analysis of the Exponentially Windowed RLS Algorithm for Time-Varying Systems, Ardalan, S. H. and Alexander S. T.
34
1987
Floating-Point Error Analysis of Recursive Least-Squares and Least-Mean-Squares Adaptive Filters, Ardalan, S. H.
34
1986
Formant Frequency Discrimination and Recognition in Subjects Implanted with Intracochlear Stimulating Electrodes, White, M. W.
34
1983
Frequency-Domain Nonlinear Circuit Analysis Using Generalized Power Series, Rhyne, George W., Steer, Michael B., and Bates, Bevan D.
34
1988
Fresnel Transforms and Bragg Cell Processors, VanderLugt, A.
34
1985
General Theory of Sampling Synthesis, Rhodes, Donald R.
34
1973
Generalized Approach to Routing Mixed Analog and Digital Signal Nets in a Channel, Gyurcsik, Ronald S. and Jeen, Jzan-Ching
34
1988
Generalized Power Series Analysis of Intermodulation Distortion in a MESFET Amplifier: Simulation and Experiment, Rhyne, George W. and Steer, Michael B.
34
1987
Generation and Annealing of Defects in Silicon Dioxide, Reisman, A., Williams, C. K., and Moldonado, J. R.
34
1987
Hamiltonian Cycles in the Shuffle-Exchange Network, Liu, Wentai, Hildebrandt, Thomas H., and Cavin, Ralph, III
34
1989
High-Frequency Limits of Millimeter-Wave Transistors, Steer, Michael B. and Trew, Robert J.
34
1986
Integration of Artificial Intelligence Approaches into Electric Power Distribution Analysis, Monitoring and Control, Lubkeman, David, Gyurcsik, Ronald, and White, Mark
34
1988
Large-Signal, Analytic Model for the GaAs MESFET, Khatibzadeh, M. Ali and Trew, Robert J.
34
1988
Measurement of Minimum-Geometry MOS Transistor Capacitances, Paulos, John J. and Antoniadis, Dimitri A.
34
1985
Microcomputer-Controlled Laser Beam Analyzer, Hand, Larry E., Nagle, H. Troy, Jr., and Kearns, David V., Jr.
34
1982
Modelling of Silicon Oxidation from 1 x 10 -5 to 20 Atmospheres, Reisman, A., Nicollian, E. H., Williams, C. K., and Merz, C. J.
34
1986
Multichannel Cochlear Implants: Channel Interactions and Processor Design, White, Mark W., Merzenich, Michael M., and Gardi, John N.
34
1984
Multiprocessor Architecture for Two-Dimensional Digital Filters, Kim, J. H. and Alexander, W. E.
34
1987
Negative Differential Resistance in a Strained-Layer Quantum-Well Structure with a Bound State, Lee, G. S., Hsieh, K. Y., Kolbas, R. M.
34
1987
New Model for the Thermal Oxidation Kinetics of Silicon, Nicollian, Edward H. and Reisman, A.
34
1988
Object Identification Using Automated Decision Tree Construction Approach for Robotics Applications, Luo, Ren C., Scherp, Ralph S., and Lanzo, Mark
34
1987
Observable Stored Energies of Electromagnetic Systems, Rhodes, Donald R.
34
1976
On the Strength of Maxwell's Equations, Matthews, N. F. J.
34
1987
1 m m MOSFET VLSI Technology: Part I-An Overview, Yu, Hwa-Nien, Reisman, Arnold, Osburn, Carlton M., Critchlow, Dale L., and Chang, T. H. P.
34
1979
Optical Characterization of Pseudomorphic In x Ga 1-x As-GaAs Single-Quantum-Well Heterostructures, Anderson, N. G., Laidig, W. D., Kolbas, R. M., and Lo, Y. C.
34
1986
Performance Effects of Architectural Complexity in the Intel 432, Colwell, Robert P., Gehringer, Edward F., and Jensen, E. Douglas
34
1988
Performance of a Circuit Simulation Program Using an Attached Processor for MOS-Transistor Evaluation, Gyurcsik, Ronald S.
34
1987
Pipelined Pseudoparallel System Architecture for Real-Time Dynamic Scene Analysis, Agrawal, Dharma P. and Jain, Ramesh
34
1982
Power Factor Indicators, Browne, William Hand, Jr.
34
1901
Properties of SiO² on Si after Exposure to 3:1 H² + N² and NH³, Ruggles, G. A., Koba, R., and Tressler, R. E.
34
1986
Psychophysical and Neurophysiological Consideration in the Design of a Cochlear Prosthesis, White, M. W.
34
1984
Radiation-Induced Response of Operational Amplifiers in Low-Level Transient Radiation Environments, Paulos, John J., Bishop, Richard J., and Turflinger, Thomas L.
34
1987
Rasterization Theory, Architectures, and Implementations for a Class of Two-Dimensional Problems, Liu, Wentai and Cavin, Ralph K., III
34
1988
Reactance Theorem, Rhodes, D. R.
34
1977
Semanitcs-Based Approach to Analyzing Concurrnt Programs, Carver, Richard H. and Tai, Kuo-Chung
34
1988
Signal Propagation on Single Phase Power Distribution Lines at Power Line Carrier Frequencies, Hemminger, R. C., Gale, L. J., and O'Neal, J. B., Jr.
34
1986
Solid-State Power Devices (Electronics), Baliga, B. Jayant
34
1987
Some Electrophysical Data Relevant to Excitation Control Techniques for a Cochlear Prosthesis, White, Mark and Merzenich, Michael
34
1979, (English Translation)
Stability Analysis of the Fast RLS Adaptation Algorithm, Kim, Daehoon and Alexander, Winser E.
35
1988
Stability Considerations for Adaptive Optical Filtering, Bardos, A. M., Beaudet, W. R. and VanderLugt, A.
35
1986
State Space Analysis of LCI Fed Synchronous Motor Drives in the Steady State, Colby, Roy S., Lipo, Thomas A., and Novotny, Donald W.
35
1985
Stimulated Emission from Ultrathing InAs/GaAs Quantum Well Heterostructures Grown by Atomic Layer Epitaxy, Tischler, M. A., Anderson, N. G., Kolbas, R. M., and Bedair, S. M.
35
1987
Stimulated Emission in Ultrathin (20 ) Al x Ga 1-x As-GaAs Single Quantum Well Hetrostructures, Lo, Y. C., Hsieh, K. Y., and Kolbas, R. M.
35
1988
Substation Noise at Distribution-Line Communication Frequencies, O'neal, J. B., Jr.
35
1988
Timing and Area Optimization of CMOS Combinational-Logic Circuits Accounting for Total-Dose Radiation Effects, Gyurcsik, R. S., Thomas, D. W., Gallimore, R. H., Bhuva, B. L., and Kerns, S. E.
35
1987
Toward a Fault-Tolerant Processor for Medical Applications, McAllister, David F. and Nagle, H. Troy
35
1988
Transient Response of Electron Transport in GaAs Using the Monte Carlo Method, Glisson, T. H., Williams, C. K., Hauser, J. R., and Littlejohn, M. A.
35
1982
Transient Weight Misadjustment Properties for the Finite Precision LMS Algorithm, Alexander, S. T.
35
1987
Transverse Junction Stripe Laser with a Lateral Heterobarrier by Diffusion Enhanced Alloy Disordering, Yang, Y. J., Lo, Y. C., Lee, G. S., Ksieh, K. Y., and Kolbas, R. M.
35
1986
Two-Dimensional Monte Carlo Simulation of a Submicron GaAs MESFET with a Nonuniformly Doped Channel, Williams, C. K., Glisson, T. H., Hauser, J. R., Littlejohn, M. A., and Abusaid, M. F.
35
1985
United States Patent: No. 4,701,953: Signal Compression System, White, M. W.
35
1987
Use of Decimated Photodetector Arrays in Spectrum Analysis, VanderLugt, A.
35
1988
Engineering Mechanics
Experimental Investigation of the Radiation and Free-Convection Heat Transfer from a Cylindrical Disk Extended Surface, Edwards, J. A. and Chaddock, J. B.
35
1963
Engineering Research
Correlative Light, Electron, and Ion Microscopy on a Single Histologic Section, Kupke, K. G., Pickett, J. P., Ingram, P., Griffis, D. P., Linton, R. W., and Shelburne, J. D.
35
1983
Dose-Dependent Cesium Ion Beam Damage Effects on Chemically Modified Poly(methyl metacrylate) Films Using Secondary Ion Mass Spectrometry and X-ray Photoelectron Spectroscopy, Simko, S. J., Griffis, D. P., Murray, R. W., and Linton, R. W.
35
1985
Preparation of Biological Tissue Sections for Correlative Ion, Electron, and Light Microscopy, Kupke, K. G., Pickett, J. P., Ingram, P., Griffis, D. P., Linton, R. W., Burgert, P. C., and Shelburne, J. D.
35
1984
Study of the Interior Ballistic Equations, Struble, Raimond A.
35
1959
Industrial Engineering
Addendum to "A Comparison of Heuristics for A School Bus Scheduling Problem", Dauler, Jeffrey C. and Nuttle, Henry L. W.
35
1987 (see:
Affirmative Action Algorithms, Fathi, Yahya and Tovey, Craig
35
1986
Analysis and Modeling of a Proposed Mining and Beneficiation Process, Hodgson, Thom J., King, Russell E., McClave, James T., Sullivan, James H., and Zegel, William C.
35
1987
Avoiding Competitive Wipeout - The Tale of Three Manufacturing Firms, Canada, John R. and Sullivan, William G.
35
1987
Clinical Profiles of Hospital Discharge Rates in Local Communities, Griffith, John R., Wilson, Peter, Wolfe, Robert A., and Bishcak, Diane P.
35
undated
Comparison of Heuristics for a School Bus Scheduling Problem, Graham, Derek and Nuttle, Henry L. W.
35
1986
Computational Complexity of LCPs Associated with Positive Definite Symmetric Matrices, Fathi, Yahya
35
1978
Controlled Perturbations for Quadratically Constrained Quadratic Programs, Fang, S. C. and Rajasekera, J. R.
35
1986
Design Procedures for Just-In-Time Production Systems, Trevino, Jaime and McGinnis, Leon F.
35
1987
Developing Control Rules for an AGVS Using Markov Decision Processes, Hodgson, Thom J., King, Russell E., Monteith, Steve K., and Schultz, Scott R.
35
1987
Economically Optimal Sample Size, Frequency and Capability Indices Using X Charts, Hancock, W., Lundberg, D., Kelton, and Bischak, D.
35
1986
Effects of Spatial Ability on Automobile Navigation, Antin, Jonathan F., Dingus, Thomas A., Hulse, Melissa C., and Wierwille, Walter W.
35
1988
Electronic Spreadsheet Implementation of a Lot Sizing Procedure for a Single-Card Kanban System, Trevino, Jaime and McGinnis, Leon F.
35
undated
Empirical Comparison of Menu Selection, Command Entry, and Combined Modes of Computer Control, Antin, Jonathan F.
35
1988
Feasible Direction Method for Linear Programming, Murty, K. G. and Fathi, Y.
35
1984
Furniture Parts Classification and Coding System, Culbreth, C. Thomas
35
1987
Impact of the Just-In-Time Production System on Facilities Design, Trevino, Jaime and McGinnis, Leon F.
35
1987
International Directory of Educational Programs in Ergonomics/Human Factors, Pearson, Richard G., ed.
35
1988
Methodology for Computation Reduction for Specially Structured Large Scale Markov Decision Problems, Ding, Fong-Yuen, Hodgson, Thom J., and King, Russell E.
35
1988
Microcomputer Software Costing Less than $1000 for Economic and Multi-Attribute Decision Analysis, Canada, John R. and Hodge, George L.
35
1988
Non-Traditional Method for Evaluating CIM Opportunities Assigns Weights to Intangibles, Canada, John R.
35
1986
Note on Linear Programming and the Single Machine Lot Size Scheduling Problem, Hodgson, Thom J. and Nuttle, Henry L. W.
35
1985
Perturbation Approach to the Main Duality Theorem of Quadratic Geometric Programming, Fang, S. C. and Rajasekera, J. R.
35
1987
Review of Surveys on Use of Capital Investment Evaluation Techniques, Canada, John R. and Miller, Nancy P.
35
1985
Subjective Reports of Stress and Strain as Concomitants of Work, Pearson, R. G.
35
1981
Toward Use of Multi-Attribute Methodologies for Evaluation of Quality/Organization Performance, Canada, John R.
35
1988
Materials Science and Engineering
Atomic Layer Epitaxy of the Ga-As-In-As Superalloy, McDermott, B. T., El-Masry, N. A., Tischler, M. A., and Bedair, S. M.
35
1987
Effectiveness of Strained-Layer Supperlattices in Reducing Defects in GaAs Epilayers Grown on Silicon Substrates, El-Masry, N., Tarn, J. C. L., Humphreys, T. P., Hamaguchi, N., Karam, N. H., and Bedair, S. M.
35
1987
Microanalytical and Microstructural Analysis of Boron and Aluminum Regions in Sintered Alpha Silicon Carbide, Davis, R. F., Lane, J. E., Carter, C. H., Jr., Bentley, J., Wadlin, W. H., Griffis, D. P., Linton, R. W., and More, K. L.
35
1984
Mechanical and Aerospace Engineering
Accurate, Stable, Explicit, Parabolized Navier-Stokes Solver for High Speed Flows, Gielda,T. and McRae, D.
35
1986
Analysis and Simulation of New Approximation Equations for Boundary-Layer Flow on Curved Surfaces, Kleinstreuer, Clement and Eghlima, Ali
35
1985
Analysis of Bonded Composite Material Structural Components Using a Higher Order Plate Theory, Klang, Eric C.
35
1988
Analysis of Selected Standard Implicit Schemes with Arbitrary Mesh Movements, Orkwis, Paul D. and McRae, D. Scott
35
1987
Analysis of the Manufacture of Flat Asymmetric Laminates, Klang, Eric and Chang, D. L.
35
1988
Analytical Study of the Effect of Convection Heat Transfer on the Sublimation of a Frozen Semi-Infinite Porous Medium, Fey, Y. C. and Boles, M. A.
35
1987
Analytical Study of the Effect of the Darcy and Fick Laws on the Sublimation of a Frozen Semon-Infinite Porous Medium, Fey, Y. C. and Boles, M. A.
35
1987
Application of High Temperature Solar Central Receivers to Coal Gasification, Leach, James E. and Copeland, Robert J.
35
undated
Approximate Solution for Rate of Sublimation-Dehydration of Foods, Cho, S. H. and Sunderland, J. E.
35
1970
Block-Independent Control of Distributed Structures, Silverberg, L. M. and Meirovitch, L.
35
1985
Chinese Menu Approach to Aerospace Engineering Curricula, Hale, Francis J.
35
1973
Comparison of the Wear Resistance of Selected Steels and Cemented Carbide Cutting Tool Materials in Machining Wood, Bayoumi, Abdel E. and Bailey, John A.
35
1985
Component-Level Analysis of Composite Box Beams, Klang, Eric C. and Kuo, T. M.
35
1989
Computation of Stress Intensity Factors for Plate Bending via a Path-Independent Integral, Sosa, Horacio A. and Eischen, Jeffrey W.
35
1986
Contact Stresses in Pin-Loaded Orthotropic Plates, Hyer, M. W. and Klang, E. C.
35
1984
Contributions of Personal Radios to the Noise Exposure of Employees at One Industrial Facility, Skrainar, Stephen F., Royster, Larry H., Berger, E. H., and Pearson, Richard G.
35
1987
Cost Reduction Through Automated Real-Time Dynamic Scheduling, Molten, Bridget C. and Maday, Clarence J.
35
undated
Damage Initiation of Curved Free Edges: Applications to Uniaxially Loaded Plates Containing Holes and Notches, Klang, E. C. and Hyer, M. W.
35
1985
Energy Release Rates and Related Balance Laws in Linear Elastic Defect Mechanics, Eischen, J. W. and Herrmann, G.
36
1987
Engineering Aspects of Machining, Bailey, John A.
36
1969
Evaluation of the Effectiveness of Three Hearing Protection Devices at an Industrial Facility with a TWA of 107 dB, Royster, Larry H., Royster, Julia Doswell, and Cecich, Thomas F.
36
1984
Experimental Study of Thermoelastic Effects in Scuffing Failure of Sliding Lubricated Contacts, Rhatigan, J. L., Johnson, R. R., and Dow, T. A.
36
1988
Explicit Upwind Algorithm for the Parabolized Navier-Stokes Equations, Korte, J. J. and McRae, D. S.
36
1988
Fracture of Nonhomogeneous Materials, Eischen, J. W.
36
1987
Getting Started in Audiometric Data Base Analysis (ADBA), Royster, Larry H. and Royster, Julia Doswell
36
1987
Identification of External Excitations in Self-Adjoint Distributed Systems Using Modal Filters, Baruh, H. and Silverberg, L. M.
36
1986
Laminar Mass Transfer in the Wake Region of Closely Spaced Drops, Ramachandran, Ram S. and Kleinstreuer, Clement
36
1986
Local Skin Friction and Heat Transfer in Combined Free-Forced Convection from a Cylinder or Sphere to a Power-Law Fluid, Wang, T. Y. and Kleinstreuer, C.
36
1987
Machine-Scored Testing in the Engineering Classroom, Leuba, Richard J.
36
1987
Machine-Scored Testing, Part I: Purposes, Principles, and Practices, Leuba, Richard J.
36
1986
Machine-Scored Testing, Part II: Creativity and Item Analysis, Leuba, Richard J.
36
1986
Noise Surveys and Data Analysis, Royster, Larry H., Berger, Elliott H., and Royster, Julia Doswell
36
1986
Optimum Design of Shafts with the First Two Critical Speeds Specified, Lu, Wenlin and Maday, C. J.
36
1985
Optimum Design of Stepped Shafts: A Study in Computational Optimization, Maday, C. J.
36
1982
Parametric Analysis of Self-Freezing in an Initially Wet Porous Medium, Fey, Y. C. and Boles, M. A.
36
1988
PDM-A Product Assemblability Merti Analysis Tool, Zorowski. Carl F.
36
1986
Pinned Connections in Composite Materials: Theory and Experiment, de Jong, Th. and Klang, E. C.
36
1985
Population Balance Approach to Direct-Contact Secondary Refrigerant Freezing, Byrd, L. W. and Mulligan, J. C.
36
1986
Residual Stresses in Turned AISI 4340 Steel, Sadat, A. B. and Bailey, J. A.
36
1987
Role of Tool Composition and Tool Geometry in Controlling the Surface Finish in Machining Wood, Bayoumi, Abdel-Moez E. and Bailey, John A.
36
1985
Semisimilar Solutions for Unsteady Free-Convective Boundary-Layer Flow on a Vertical Flat Plate, Williams, J. C., Mulligan, J. C., and Rhyne, T. B.
36
1987
Solar Hydrogen Production: The Sulfur-Iodine Cycle Versus Water Vapor Electrolysis, Leach, James E. and Copeland, Robert J.
36
undated
Thermal Conductivity of Various Meats, Hill, James E., Leitman, Jerry D., and Sunderland, J. Edward
36
1967
Thermohydraulic Model of Condensation in Monogroove Heat Pipes for Spacecraft Heat Rejection, Henson, Robert and Leach, James W.
36
1988
Transient Forced Convection in Laminar Channel Flow with Stepwise Variations of Wall Temperature, Cotta, R. M. and Ozisik, M. N.
36
1986
Transient Free Convection of a Non-Newtonian Fluid Along a Vertical Wall, Haq, S., Kleinstreuer, C., and Mulligan, J. C.
36
1988
Transient Laminar Forced Convection to Power-Law Fluids Inside Ducts Resulting from a Sudden Change in Wall Temperatures, Kim, W. S. and Ozisik, M. N.
36
1988
Transient, Combined Conduction and Radiation in an Absorbing, Emitting, and Isotropically Scattering Solid Sphere, Tsai, J. R. and Ozisik, M. N.
36
1987
Uniform Damping Control of Spacecraft, Silverberg, L.
36
1986
Minerals Research Lab
Feldspar and Aplite, Rogers, Carroll P., Jr. and Neal, J. Philip
36
undated
FMC Corporation's North Carolina Phosphate Research Project, Lewis, Robert M.
36
1974
High-Quality Wet-Ground Mica from Mica Schist Ore, Lewis, Robert M.
36
1969
Pilot Plant Evaluation of an Anionic Detergent-Type Reagent for Beneficiation of a Glass Sand, Lewis, Robert M.
36
1976
Rapid Quantitative Analysis of Mineral Samples by Use of an Air Pycnometer, Lewis, Robert M.
36
1972
Research Approach to Flotation of Strip Mine and Deep Mine Coals, Lewis, Robert M.
36
1972
Scheelite Discovered in Certain Soapstone Deposits in the Blue Ridge of Madison County, North Carolina, Bentzen, Edwin H., III and Wiener, Leonard S.
36
1973
Selective Flotation Separation of Feldspar in Non-Fluoride Medium, Malghan, Subhas G.
36
1976
Talc or Soapstone?, Bentzen, Edwin H., III
36
1973
Nuclear Engineering
Application of Texture in Predicting Nuclear Fuel Cladding Creep, Daugherty, William L. and Murty, K. Linga
36
1987
Dynamic Analysis of a Pressurized Water Reactor, Saxe, R. F, Mayo, C. W., and Saxe, T.
36
1976
Fluctuating Mechanical Forces on a Pipe-Bend in a PWR System, Saxe, R. F.
36
1976
Interstitial-Impurity Radiation-Defect Interactions in Ferritic Steels, Murty, K. Linga
36
1985
Theoretical and Experimental Studies of the Vapor Shielding Mechanism for Surfaces Subjected to High Heat Fluxes, Gilligan, J., Auciello, O., Bourham, M., Hankins, O., Wehring, B., Han, D., Mohanti, R., and Stock, J.
36
1988
Two-Group Neutron-Transport Theory: Existence and Uniqueness of the H -Matrix, Siewert, C. E., Burniston, E. E., and Kriese, J. T.
36
1971
Operations Research
Economic Equilibrium Model on a Multicommodity Network, Fang, S. C. and Peterson, E. L.
36
1985
Power Semiconductor Research Center
Comparison of 6H-SiC, 3C-SiC, and Si for Power Devices, Bhatnagar, Mohit and Baliga, B. Jayant
36
1993
Precision Engineering Center
Design and Performance of a Small-Scale Diamond Turning Machine, Falter, P. J. and Dow, T. A.
36
undated
Development of a High Speed System to Control Dynamic Behavior of Mechanical Structures , Luttrell, D. E. and Dow, T. A.
36
undated
Serials
UA 105.200 Series 4
4.75 Linear feet
1933-1999
9.5 archival boxes
College of Engineering
Around COE
36
1994-1996
Scope and Contents note
(Broken series)
College of Engineering News
36
1985-Currently Received
Scope and Contents note
(Broken series) Earlier title: School of Engineering Newsletter
Engineering Alumni Newsletter
36
1969-1978
Engineering Newsletter
36
1963-1968
Eos Newsletter
36
1992-1993
Scope and Contents note
(Broken series)
Research Grants and Contracts Bulletin
36
1977-1979
Scope and Contents note
(Broken series)
Agricultural Engineering
Tracks
36
1960
Scope and Contents note
(Broken series)
Biological and Agricultural Engineering
BAE News
37
1995-1996
Scope and Contents note
(Broken series)
Biological and Agricultural Engineering Weekly Newsletter
37
1988-1995
Scope and Contents note
(Broken series)
Center for Advanced Computing and Communications
CACCommunicator
37
1995
Scope and Contents note
(Broken series)
Center for Communications and Signal Processing
The Communicator
37
1987-1989
Scope and Contents note
(Broken series)
Center for Nuclear Power Plant Structures, Equipment, and Piping
F.Y.I.
37
1995-1996
Scope and Contents note
(Broken series)
Center for Research on Scientific Computation
Newsletter
37
1989
Center for Transportation and the Environment
CTE News & Notes
37
1995
Scope and Contents note
(Broken series)
Ceramic Engineering
Ceramic Engineering News
37
1948-1949
Chemical Engineering
Chemical Engineering at N C State University
37
1990-1999
Scope and Contents note
(Broken series) Earlier title: Chemical Engineering at NCSU
Chemical Engineering Newsletter
37
1991
Scope and Contents note
(Broken series)
Civil Engineering
Civil Engineering Newsletter
37
1992-1993
Mann Hall News
37
1983
Mann Hall Surveyor
37
1969, 1977
Scope and Contents note
(Broken series)
Construction Automation & Robotics Laboratory
CARL News
37
1994
Scope and Contents note
(Broken series)
Electric Power Research Center
Current
37
1990-1995
Scope and Contents note
(Broken series)
Electrical and Computer Engineering
ECE Undergraduate Design Center Newsletter
37
1992
Scope and Contents note
(Broken series)
Engineering Research
Engineering Research News
37
1949-1979
Scope and Contents note
(Broken series)
Engineers Council
North Carolina State Engineer
37
1991-1994
Scope and Contents note
(Broken series) Earlier title: Southern Engineer
Southern Engineer
37
1933-1947 (Vols. I-IX)
Scope and Contents note
(Broken series)
Southern Engineer
38
1947-1957 (Vols. X-XVIII)
Scope and Contents note
(Broken series)
Southern Engineer
39
1957-1967 (Vols. XVIX [sic]-XXXVIII)
Scope and Contents note
(Broken series)
Southern Engineer
40
1967-1979 (Vols. XXXIX-L)
Scope and Contents note
(Broken series)
Southern Engineer
41
1979-1990 (Vols. LI-LXII)
Scope and Contents note
(Broken series)
Ergonomics Resource Center
ErgoTalk
41
1995
Freshman Technical Society
Riddick Rubbish
41
1975
Furniture Club
Hot Press
41
1980-1984
Scope and Contents note
(Broken series)
Industrial Engineering
?
41
1947
I. E. Alumni News
41
1981, 1984
Scope and Contents note
(Broken series)
Industrial Engineering News
41
1986-1991
Scope and Contents note
(Broken series)
Industrial Engineering Newsletter
41
1974-1976
Industrial Extension Service
Industrial Extension Newsletter
41
1965-1976
Industrial Extension Newsletter
42
1977-1979
Marine Advisory Services Reporter
42
1971, 1973
Scope and Contents note
(Broken series)
News
42
1956-1963
Newsletter
42
1956
Instructional Television Fixed Service
ITFS
42
1986
Integrated Manufacturing Systems Engineering Institute
IMSEI Partners
42
1991
Integrated Manufacturing Systems Engineering Newsletter
42
1994
Mars Mission Research Center
M² RC Newsletter
42
1990-1994
Scope and Contents note
(Broken series)
Materials Science and Engineering
Alumni Newsletter
42
1987
Ceramic, Metallurgical and Materials Engineering Alumni
42
1971-1972
Tetrahedron
42
1988
Mechanical and Aerospace Engineering
MAE Newsletter
42
1995
Microelectronics Center of North Carolina
Integrated Circuits
42
1988
Scope and Contents note
(Broken series)
Mineral Industries
Metallurgical Engineering Alumni
42
1965-1968
Minerals Research Laboratory
Minerals Research Laboratory Bulletins
42
1959-1971
Scope and Contents note
(Broken series)
Wolfpack Rocks
42
1972-1999
Scope and Contents note
(Broken series) Earlier title:
Minerals Research Laboratory Newsletter
North Carolina Technical Services Program
North Carolina Technical Services Newsletter
43
1967-1970
Scope and Contents note
(Broken series)
Nuclear Engineering
NCSU Nuclear Engineering
43
1986-1988
NCSU Nuclear Reactor Program News
43
1976, 1978
Scope and Contents note
(Broken series)
North Carolina State University Nuclear Engineering Newsletter
43
1989-1994
Scope and Contents note
(Broken series)
Occasional Newsletter
43
1968-1969
Scope and Contents note
(Broken series)
Operations Research
Operations Research Newsletter
43
1997
Scope and Contents note
(Broken series)
Precision Engineering Center
Precision Engineering Center Newsletter
43
1985
Scope and Contents note
(Broken series)
Productivity Research and Extension Program
PREP News
43
1976-1984
Society of Automotive Engineers
S. A. E. Newsletter
43
1994
Tau Beta Pi
Slip-Stick
43
1972-1974
Undergraduate Programs
Franklin Flier
43
1992-1995
Water Resources Research Institute
North Carolina Stormwater Manager
43
1980-1981
Scope and Contents note
(Broken series)
Research Special
43
1974-1977
Urban Water Consortium
43
1991
Scope and Contents note
(Broken series)
Water Resources Research Institute News
43
1966-1971
Scope and Contents note
(Broken series)
Water Resources Research Institute News
44
1972-1979
Scope and Contents note
(Broken series)
Water Resources Research Institute News
45
1980-1996
Scope and Contents note
(Broken series)
Unprocessed Materials
UA 105.200 Series 5
9.5 Linear feet
1967-2013
7 cartons, 1 archival storage box
Water Resources Research Institute
Water Resources Research Institute
Accession no. 2006-0100
48
1967-1989
Scope and Contents note
Water Resources Research Institute miscellaneous reports and annual reports
Water Resources Research Institute
Accession no. 2006-0100
49
1972-2000
Scope and Contents note
Water Resources Research Institute miscellaneous reports
Water Resources Research Institute
Accession no. 2006-0100
50
1974-1994
Scope and Contents note
Water Resources Research Institute miscellaneous reports
Water Resources Research Institute
Accession no. 2006-0100
51
1967-1993
Scope and Contents note
Water Resources Research Institute miscellaneous reports
Water Resources Research Institute
Accession no. 2006-0100
52
1967-1996
Scope and Contents note
Water Resources Research Institute miscellaneous reports
Water Resources Research Institute
Accession no. 2006-0100
53
1982-1999
Scope and Contents note
Water Resources Research Institute miscellaneous reports
Water Resources Research Institute Publications
Accession no. 2007-0209
55
1976-1982
Scope and Contents note
Water Resources Research Institute Reports Nos. 117, 140-142, 171
Water Resources Research Institute Report No. 355, David Genereux and Casey Kennedy, "Pilot Project on Groundwater Dating in Confined Aquifers of the North Carolina Coastal Plain," August 2005 (2 copies)
Accession no. 2007-0056
55
2005
Miscellaneous Publications
Miscellaneous Publications
54
1981-2007
Scope and Contents note
Miscellaneous publications, including the College of Engineering Newsletter, R.J. Reynolds Tobacco Company Award programs, and Engineering Frontline.
NC State Engineering
Accession no. 2007-0265
55
Fall 2007
Civil, Construction, and Environmental Engineering, Research Projects
55
2003 - 2004
NC State Engineering
Accession no. 2008-0108
55
Spring 2008
NC State Engineering (2 copies)
Accession no. 2008-0276
55
Fall 2008
Distinguished Engineering Alumnus Awards Banquet program (2 copies)
Accession no. 2008-0282
55
6 Nov. 2008
New Faculty 2007-08 booklet (2 copies)
Accession no. 2008-0282
55
2007-2008
Office of Minority Engineering Programs brochure (2 copies)
Accession no. 2008-0282
55
2008
Postcard congratulating Dr. Rajendra Pachuri for receiving the 2007 Nobel Peace Prize
Accession no. 2008-0282
55
2007
Records, A-Z
46
1.0 linear foot
Assessing the Impact of MCNC on the Industrial and Economic Development of North Carolina, Hicks, Donald A., Consultant
47
1990
Reprints
47
1964-1979
Research Publications
47
1980-1983
Going to Extremes: Observations from the Biology/Engineering Interface, Kelly, Robert M.: 2003 (R. J. Reynolds Tobacco Company Award for Excellence in Teaching, Research, and Extension Distinguished Lecture Series)
47
2003
Engineering Frontline
47
2004
Center for Marine and Coastal Studies, Statistical Properties of Kinematics and Dynamics of a Random Gravity Wave Field, Tung, C. C.: 1974 (Report No. 74-2)
47
1974
Center for Marine and Coastal Studies, Wave-Current Interactions in Water of Variable Depth, Radwan, A. M., Huang, N.E., Tung, C. C.: 1975 (Report No. 75-3)
47
1975
Center for Marine and Coastal Studies, Long Waves Trapped by the Cape Fear Continental Shelf Topography: A Model Study of their Propagation Characteristics and Circulation Patterns, Brooks, David A.: 1976 (Report No. 76-2)
47
1976
NC State Engineering
Accession no. 2009-0204
56
Fall 2009
NC State Engineering
56
Fall 2010
NC State Engineering
56
Fall 2011
NC State Engineering
Accession 2012.0121
56
2012 Spring/Summer
NC State Engineering
Accession 2013.0076
56
2012 Fall/Winter
NC State Engineering
Accession 2013.0076
56
2013 Spring/Summer