James Craig Edsall Papers
MC 00099
Special Collections Research Center
5.0 Linear feet
1968-1977
The James Craig Edsall Papers contain examinations, quizzes, laboratory exercises, problem sets, syllabi, course handouts, and class notes, 1969-1974, when Edsall was an undergraduate student in industrial engineering at North Carolina State University. The collection also includes some personal materials, 1968-1977, from Edsall's student years.
James Craig Edsall (1952- ) of Concord, North Carolina, graduated with degrees in industrial engineering from North Carolina State University--a B.S in 1974 and an M.S. in 1977.
For current information on the location of these materials, please consult the Special Collections Research Center
Reference Staff.
10 archival boxes
Edsall, James Craig, 1952-
Restrictions to Access
This collection is open for research; access requires at least 24 hours advance notice.
Acquisitions Information
Gift of James Craig Edsall, 1977 July 18 (Accession no. 1977-0009).
Preferred Citation
[Identification of item], James Craig Edsall Papers, MC 99, Special Collections Research Center, North Carolina State University Libraries, Raleigh, NC
Copyright Notice
The nature of the NCSU Libraries' Special Collections means that copyright or other information about restrictions may be difficult or even impossible to determine despite reasonable efforts. The NCSU Libraries claims only physical ownership of most Special Collections materials.
The materials from our collections are made available for use in research, teaching, and private study, pursuant to U.S. Copyright law. The user must assume full responsibility for any use of the materials, including but not limited to, infringement of copyright and publication rights of reproduced materials. Any materials used for academic research or otherwise should be fully credited with the source.
Processing Information
Processed by Will Andersen,
2006 December
Encoded by Will Andersen,
2006 December
Biographical Note
James Craig Edsall (1952- ) of Concord, North Carolina, graduated with degrees in industrial engineering from North Carolina State University--a B.S in 1974 and an M.S. in 1977.
Scope and Content Note
The
James Craig Edsall Papers contain examinations, quizzes, laboratory exercises, problem sets, syllabi, course handouts, and class notes, 1969-1974, when Edsall was an undergraduate student in
industrial engineering at
North Carolina State University. The collection also includes some personal materials, 1968-1977, from Edsall's student years.
Organization of the Collection
This collection is divided into three series: Course Materials, Personal Materials, and Class Notes.
North Carolina State University--Students--History.
College students--North Carolina--History
Industrial engineering--Study and teaching (Higher)--North Carolina
Course Materials
MC 99 Series 1
3.25 Linear feet
1969-1974
6.5 archival boxes
Scope and Contents note
This series consists of examinations, quizzes, laboratory exercises, problem sets, syllabi, course handouts, and class notes, 1969 to 1974. Course titles are taken from the
North Carolina State Record. One folder contains materials from a course in sociology Edsall took at the University of North Carolina at Charlotte.
Chemistry 101: General Chemistry I
1
1
1969-1971
Chemistry 101L: General Chemistry I Laboratory
1
2
1970
Chemistry 105/107: Principles of Chemistry
1
3
1971
Computer Science 111: Algorithmic Languages I
1
4
1972
Engineering 101: Engineering Graphics I
1
5
1970-1971
Engineering 120: Engineering Concepts
1
6
1970
Economics 205: Economic Activity
1
7
1971
Economics 260: Accounting I (1 of 2)
1
8
1972
Economics 260: Accounting I (2 of 2)
1
9
1972
Electrical Engineering 331/339: Principles of Electrical Engineering/Laboratory
2
1
1973
Electrical Engineering 331/332: Principles of Electrical Engineering
2
2
1972-1973
Electrical Engineering 332: Principles of Electrical Engineering
2
3
1974
Engineering Mechanics 205: Principles of Engineering Mechanics
2
4
1972
Engineering Mechanics 307: Mechanics of Solids
2
5
1972
English 112: Composition and Reading
2
6
1971
English 205: Studies in Great Works of Literature
2
7
1971
History 105: Western Civilization Since 1400
2
8
1972
Industrial Engineering 311: Engineering Economic Analysis (1 of 3)
3
1
1972
Industrial Engineering 311: Engineering Economic Analysis (2 of 3)
3
2
[1971-1972]
Industrial Engineering 311: Engineering Economic Analysis (3 of 3)
3
3
1971-1972
Industrial Engineering 351: Product and Process Engineering (1 of 2)
3
4
1972
Industrial Engineering 351: Product and Process Engineering (2 of 2)
3
5
1972
Industrial Engineering 352: Work Analysis and Design (1 of 2)
3
6
1973
Industrial Engineering 352: Work Analysis and Design (2 of 2)
3
7
1973
Industrial Engineering 353: Statistical Quality Control
3
8
1972
Industrial Engineering 354: Human Factors Engineering
3
9
1973
Industrial Engineering 361: Quantitative Methods in Industrial Engineering
4
1
1972
Industrial Engineering 401: Industrial Engineering Analysis I (1 of 2)
4
2
1973
Industrial Engineering 401: Industrial Engineering Analysis I (2 of 2)
4
3
1973
Industrial Engineering 421: Data Processing and Production Control Systems
4
4
1973
Industrial Engineering 453: Operations Planning and Plant Layout
4
5
1973
Materials Engineering 201: Structure and Properties of Engineering Materials I (1 of 2)
4
6
1971
Materials Engineering 201: Structure and Properties of Engineering Materials I (2 of 2)
4
7
[1971]
Mathematics 102: Analytic Geometry and Calculus I (1 of 3)
4
8
1971
Mathematics 102: Analytic Geometry and Calculus I (2 of 3
5
1
1971)
Mathematics 102: Analytic Geometry and Calculus I (3 of 3)
5
2
1971
Mathematics 201: Analytic Geometry and Calculus I
5
3
1971
Mathematics 202: Analytic Geometry and Calculus III (1 of 2)
5
4
1971
Mathematics 202: Analytic Geometry and Calculus III (2 of 2)
5
5
1971
Mathematics 301: Applied Differential Equations I (1 of 2)
5
6
1972
Mathematics 301: Applied Differential Equations I (2 of 2)
5
7
1972
Mechanical and Aerospace Engineering 301: Engineering Thermodynamics I (1 of 2)
6
1
1973
Mechanical and Aerospace Engineering 301: Engineering Thermodynamics I (2 of 2)
6
2
1973
Physics 205: General Physics (1 of 2)
6
3
1971
Physics 205: General Physics (2 of 2)
6
4
1971
Physics 208: General Physics (1 of 2)
6
5
1971
Physics 208: General Physics (2 of 2)
6
6
1971
Physics 208L: General Physics Laboratory
6
7
1971
Sociology 151: Introduction to Sociology (University of North Carolina at Charlotte)
6
8
1974
Statistics 371: Introduction to Probability and Statistics (1 of 3)
6
9
[1972]
Statistics 371: Introduction to Probability and Statistics (2 of 3)
7
1
1972
Statistics 371: Introduction to Probability and Statistics (3 of 3)
7
2
1972
Textiles 101/101L: Fundamentals of Textiles/Laboratory
7
3
1973
Textile Technology 250/250L: Fabric Forming Systems/Laboratory (1 of 2)
7
4
1974
Textile Technology 250/250L: Fabric Forming Systems/Laboratory (2 of 2)
7
5
1974
University Studies 302: Science and Contemporary Civilization
7
6
1973
University Studies 401: The Urban Crisis
7
7
1973
Personal Materials
MC 99 Series 2
0.25 Linear feet
1968-1977
0.5 archival boxes
Scope and Contents note
This series consists of material distributed by North Carolina State University to incoming freshmen, 1969-1970; miscellaneous material from Edsall's student years, 1968-1977, including documents relating to the Young Democrats of North Carolina; and a spiral-bound notebook containing a record of Edsall's finances, 1972-1973.
Incoming Freshman Material
7
8
1969-1970
Miscellaneous
7
9
1968-1977
Finances
7
10
1972-1973
Class Notes
MC 99 Series 3
1.5 Linear feet
1970-1974
3 archival boxes
Scope and Contents note
This series consists of spiral-bound notebooks containing notes taken by Edsall in class, 1970-1974.
Chemistry 101: General Chemistry I
8
1
1970
Chemistry 105/107: Principles of Chemistry
8
2
1971
Computer Science 111: Algorithmic Languages I
8
3
1972
Economics 205: Economic Activity
8
4
1971
Economics 260: Accounting I
8
5
1972
Economics 307: Business Law I
8
6
1974
Electrical Engineering 331/339: Principles of Electrical Engineering/Laboratory
8
7
1973
Electrical Engineering 331/332: Principles of Electrical Engineering
8
8
[1973]
Engineering Mechanics 307: Mechanics of Solids
8
9
1972
English 205: Studies in Great Works of Literature
9
1
1971
History 105: Western Civilization Since 1400
9
2
1972
Industrial Engineering 351: Product and Process Engineering
9
3
1972
Industrial Engineering 352: Work Analysis and Design
9
4
1973
Industrial Engineering 353: Statistical Quality Control
9
5
1972
Industrial Engineering 361: Quantitative Methods in Industrial Engineering
9
6
1972
Industrial Engineering 401: Industrial Engineering Analysis I
9
7
1973
Materials Engineering 201: Structure and Properties of Engineering Materials I
9
8
1971
Mathematics 201/202: Analytic Geometry and Calculus I/III
9
9
[1971]
Mathematics 301: Applied Differential Equations I
10
1
1972
Mechanical and Aerospace Engineering 301: Engineering Thermodynamics I
10
2
1973
Physics 205: General Physics
10
3
1971
Statistics 371: Introduction to Probability and Statistics
10
4
1972
Textiles 101/101L: Fundamentals of Textiles/Laboratory
10
5
1973
Textile Technology 250/250L: Fabric Forming Systems/Laboratory
10
6
1974
University Studies 302: Science and Contemporary Civilization
10
7
1973
University Studies 401: The Urban Crisis
10
8
1973